GLASS BOTTLES 15 ml
White Glass Bottle, White Tamper Evident Safety Cap & Dropper, 15 ml
Pack size10 ml15 ml30 ml100 ml
The white glass medicine bottle with a nominal volume of 15 ml is supplied as a ready-made set: bottle, long plastic dropper insert and white ribbed safety cap . full description
Lowest price in the last 30 days: €1.54
Total for 1 pcs: €1.54
Quantities add up across all combinations of this bottle.
Product description
The white glass medicine bottle with a nominal volume of 15 ml is supplied as a ready-made set: bottle, long plastic dropper insert and white ribbed safety cap. It suits small volumes of liquids that are dispensed drop by drop, such as essential oil blends, oil serums, facial oils, tinctures or concentrated active ingredients. The white opaque glass limits the light reaching the contents and hides their colour, so it is also suitable for ingredients whose properties change quickly in light. The set is declared as suitable for contact with cosmetic products.
The dropper insert is pressed into the neck of the bottle and the contents are then dispensed by tilting the bottle, drop by drop, without pouring and without your fingers touching the contents. The cap with an 18/410 neck finish sits directly on the neck.
What the set is suitable for
- Essential oil blends – the 15 ml volume matches the usual size for aromatherapy blends, and the dropper insert makes precise dispensing into a carrier oil, diffuser or bath easier.
- Oil serums and facial oils – you dispense exactly as much as the skin needs, drop by drop, and the rest stays protected from light.
- Tinctures and alcohol extracts – glass does not react with alcohol and the opaque packaging helps preserve the colour of the extract.
- Concentrated active ingredients – a small amount for dispensing into a finished cream or serum, where you count in drops.
- Samples and trial batches – for testing a formulation before larger production or for customer samples.
Volume and filling
The nominal volume is the volume the medicine bottle is intended for under normal filling. The brimful capacity is the physical volume of the bottle up to the top of the neck. The difference between them is a reserve for the dropper insert, which takes up part of the space in the neck once inserted, and for the expansion of the contents when the temperature changes. If the bottle is overfilled, pressing in the dropper insert pushes the contents out and they seep under the cap.
Fill to the nominal 15 ml, not to the brim. With alcohol and oil fillings always leave a reserve, as their volume increases when warmed.
Dropper insert and safety cap
The long dropper insert is made of polypropylene; it narrows the neck and controls the flow of the liquid. It works best with thin fillings such as essential oils, alcohol extracts or light oils. Thicker oils and viscous serums flow out of it slowly and the drops are larger. With thick fillings, therefore, test the dispensing before filling the whole batch.
The cap is made of polyethylene and the ribbing makes it easier to grip. Try opening the safety cap before the first filling. If you sell or give away the finished product, explain to customers how to open it.
Both the dropper insert and the cap are plastic. With concentrated essential oils, citrus ingredients and solvents, we recommend checking how both parts behave with your specific filling over several weeks, especially the seal under the cap and the condition of the dropper insert.
Good to know
- Preparation before first filling – wash the bottle, dropper insert and cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Traces of water in an oil filling shorten its shelf life.
- Reuse – after thorough washing the glass bottle can be refilled. The inside of the dropper insert is hard to clean, so we recommend a new one when you change the type of filling.
- Glass and temperature – sudden temperature changes are bad for glass. Let hot fillings cool before filling and do not expose the bottle to freezing temperatures.
- Other closures – closures with the same 18/410 neck finish and ready-made combinations are available in the Handymade range. With your own combination, check the seal and the dispensing with your specific formulation.
- Recycling – glass belongs in glass waste, while the dropper insert and cap are sorted as plastic.
Frequently asked questions
Parameters
Glass bottle, vial, white, 15 ml
Plastic dropper for glass vials, 18 mm, long
White Plastic Tamper Evident Safety Cap, Ribbed, 18/410
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
















































































