+421 950 333 113info@handymade.store−10 %Shop now

PLASTIC BOTTLES

White Plastic Bottle, Black Lotion Pump With Glossy Silver Collar, 300 ml

Pack size100 ml150 ml200 ml250 ml300 ml

The white plastic bottle with a volume of 300 ml and a black and silver pump is packaging for liquid and medium-viscosity cosmetic products that are dispensed by pressing. full description

AvailabilityIn stock · 202 pcs
Product codeO24PB300-OVD24CS
€1.48incl. VAT

Lowest price in the last 30 days: €1.48

Volume pricing
1–169 pcs€1.48Your price
170–1019 pcs€1.41−4 % · 1× plato
1020–5099 pcs€1.26−15 % · 6× plato
from 5100 pcs€1.11−25 % · 30× plato

Total for 1 pcs: €1.48

Quantities add up across all combinations of this bottle.

Product description

The white plastic bottle with a volume of 300 ml and a black and silver pump is packaging for liquid and medium-viscosity cosmetic products that are dispensed by pressing. The pump delivers approximately 1 ml per press, so it suits body lotions, liquid soaps, shampoos, shower gels, conditioners and massage oils, where a dose is taken repeatedly and without unscrewing the cap.

The set as a whole is declared suitable for contact with cosmetics. Only the bottle has a certificate for direct contact with food on its own; the set with the pump is intended for cosmetic products.


How the set works

  • Bottle – white PET with a 24/410 neck finish, lightweight and unbreakable, and therefore also suitable for the shower or bathroom, where glass would not be safe.
  • Pump – a black head with a silver aluminium collar, a 24/410 neck finish and a dip tube reaching to the bottom of the bottle so that even the last remnant of the contents can be drawn out.
  • Dispensing – one press corresponds to approximately 1 ml. You get the same dose with every use, and your hands do not come into contact with the contents of the bottle.

What it is suitable for

The pump works best with products that flow or can easily be pushed through a dip tube: body lotions, light emulsions, liquid hand soaps, shampoos, shower gels, micellar waters, and facial or massage oils.

With thick creams, cosmetic butters or gels with high viscosity, the press may feel stiff, or the contents may not travel up the dip tube. We recommend checking suitability for your particular consistency in the finished formulation before you fill a larger batch.

The value of 1 ml per press is approximate. The actual dose depends on the viscosity of the contents and on whether you primed the pump with several presses before first use.


Nominal and total volume

The nominal volume is the amount the bottle is designed for under normal filling. The physical volume up to the neck is slightly larger. The difference is a reserve for the dip tube and the thread of the pump, and for any expansion of the contents when the temperature changes. The bottle should therefore be filled up to the nominal volume, not to the brim, otherwise the contents will overflow when the pump is screwed on.


Good to know

Before first filling, wash the bottle and the pump, disinfect them with IPA or ethanol and leave them to dry completely. Flush the pump by pressing it several times in clean water and then in a disinfecting solution, so that the dip tube is cleaned as well.

The packaging is intended for storage at 5–30 °C and must be protected from heat. For this reason, let emulsions and oils cool to room temperature before filling. Do not expose the bottle or the pump to aggressive chemicals; with unusual recipes, we recommend testing how the packaging behaves on a small sample beforehand.

The bottle is reusable provided it is thoroughly cleaned before each new filling and the dip tube of the pump is not clogged with residue of the previous product. The pump combines plastic and aluminium, so for recycling it is sorted separately from the PET bottle.

Products with a water phase that you fill into this packaging must be preserved. Although the pump limits contact of the contents with the hands, it does not replace microbiological stability.

Closures with the same neck type, as well as ready-made combinations of bottle and closure, can be found in the Handymade range. If you make your own combination, we recommend checking the seal, the dispensing and the behaviour of the packaging with your specific formulation.


Frequently asked questions

Is the 300 ml white plastic bottle with a pump suitable for liquid soap?
Yes, liquid hand soap is one of the typical fillings for this set. The pump delivers approximately 1 ml per press, which for soap corresponds to one dose for washing hands. The PET bottle is unbreakable, so it can stand right next to the sink. The soap must be properly preserved, as it is a product with a water phase.
Can I put thick cream in the bottle with a pump?
A thick cream usually cannot be dispensed reliably with a pump of this type. A pump with a dip tube is designed for liquid and medium-viscosity products, such as body lotions or light emulsions. With thick creams, the press is usually stiff and the contents may not travel up the dip tube. We recommend testing suitability for your particular consistency on a small sample.
Is this set suitable for food, for example for cooking oil?
No, the set as a whole is not approved for contact with food. Only the bottle has a certificate for direct contact with food on its own; the pump does not have one. In combination with the pump, the packaging is therefore intended for cosmetic products, for which both components are declared suitable.
How is the pump cleaned before repeated use?
The pump is cleaned by pumping through clean water and then a disinfecting solution, for example ethanol or IPA. Pressing it several times brings the solution into the dip tube and the mechanism as well, which could not otherwise be cleaned. After that, all parts must be left to dry completely. If residue of the previous product has hardened in the dip tube, it is better to replace the pump.
Why is the bottle with a pump not filled to the brim?
The bottle is filled up to the nominal volume of 300 ml because the space above it is a reserve for the dip tube and the thread of the pump. When the pump is screwed on, the dip tube displaces part of the contents upwards, and if the bottle were overfilled, the contents would overflow through the neck. The reserve also allows for expansion of the contents at a higher temperature, for example in a bathroom.

Parameters

Plastic bottle, white, 24/410, without cap, 300 ml

Product colour
White
Country of origin
India
Diameter
58 mm
Nominal capacity
300
Brimful capacity
317 ml
Thread type
24/410
Height
146 mm
Product material
PETPlastic

Plastic pump dispenser, 24/410, black-silver, 180 mm

Product colour
BlackSilver
Country of origin
China
Diameter
27,5 mm
Thread type
24/410
Height
37 mm
Tube length
180 mm
Dose
1 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, white, 24/410, without cap, 300 ml · O24PB300PDF ↓
Plastic pump dispenser, 24/410, black-silver, 180 mm · OVD24CSPDF ↓
PDSProduct Data Sheet
Plastic bottle, white, 24/410, without cap, 300 ml · O24PB300PDF ↓
Plastic pump dispenser, 24/410, black-silver, 180 mm · OVD24CSPDF ↓
DrawingTechnical drawing
Plastic bottle, white, 24/410, without cap, 300 ml · O24PB300PDF ↓
Plastic pump dispenser, 24/410, black-silver, 180 mm · OVD24CSPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.