PLASTIC BOTTLES
White Plastic Bottle, Black Lotion Pump With Glossy Silver Collar, 200 ml
Pack size100 ml150 ml200 ml250 ml300 ml
A white plastic bottle with a nominal volume of 200 ml and a black and silver pump is a ready-made set for liquid and medium-thick cosmetic products: shower gels, liquid hand soaps, shampoos, body lotions or massage… full description
Lowest price in the last 30 days: €1.28
Total for 1 pcs: €1.28
Quantities add up across all combinations of this bottle.
Product description
A white plastic bottle with a nominal volume of 200 ml and a black and silver pump is a ready-made set for liquid and medium-thick cosmetic products: shower gels, liquid hand soaps, shampoos, body lotions or massage oils. The bottle is made of PET, is lightweight and does not break if dropped, which you will appreciate in the bathroom as well as when shipping products to customers. The opaque white wall reduces light exposure, so it is also suitable for contents with vegetable oils and other ingredients that are sensitive to light. The pump dispenses approximately 1 ml per press, so the product is not wasted and the neck of the bottle stays clean.
The set is declared suitable for contact with cosmetic products. The bottle itself is also certified for direct contact with food, while the pump is not, so the set as a whole is intended for cosmetics.
What the set is suitable for
- Rinse-off products – shower gels, shampoos, liquid soaps and foaming cleansers. The pump always dispenses the same amount and the contents do not spill from the neck.
- Body lotions and thinner emulsions – the pump draws up light face and body lotions without difficulty. The dip tube often cannot draw up thick creams and butters.
- Oil-based products – massage, body and cleansing oils.
- Liquid hair products – thin conditioners and hair serums, which pass through the dip tube without resistance.
Nominal volume and filling
The nominal volume is the amount the bottle is designed for under normal filling. The brimful capacity is the physical volume up to the rim of the neck and is slightly larger. The difference is a reserve for the body and dip tube of the pump, which take up part of the space once screwed on, and for the expansion of the contents when the temperature changes. Fill the bottle up to the nominal volume. If you fill it to the brim, the contents will be pushed out through the thread when the pump is fitted.
You cannot see the liquid level through the white wall, so measure the amount with a measuring cup or weigh it. When producing in batches, weighing is more accurate and faster.
How the pump works
The pump is screwed onto the neck of the bottle and the dip tube reaches the bottom, from where it draws up the contents when the pump head is pressed. A new pump is empty when fitted, so the first doses come out only after several presses, once the dip tube and mechanism have filled. The stated dose of 1 ml applies to liquid contents. With thicker formulations the actual amount may differ, so measure it once for a new product. When the level drops towards the bottom, you can get the remainder out by tilting the bottle towards the opening of the dip tube.
If the dip tube hits the bottom and bends once the pump is screwed on, shorten it with an angled cut so that it ends just above the bottom. The angled cut prevents the opening from sticking to the bottom, which would stop the pump from drawing up the contents.
Good to know
- Preparation before first filling – rinse the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Pump clean water through the pump several times and dry it, so that residual water does not dilute the first doses.
- Temperature of the contents – do not fill PET with hot contents. Let emulsions and gels cool to room temperature before filling, otherwise the wall may deform.
- Essential oils and solvents – with higher concentrations of essential oils, fragrance compositions or alcohol, check how both the bottle and the pump seal behave on a single piece before you fill the whole batch.
- Changing the contents – when filling a different product, flush the dip tube and mechanism by pumping clean water through them several times and let them dry. After washing and disinfection, you can use the bottle repeatedly.
- Other closures – the bottle has a 24/410 neck finish. You can find closures with the same neck type and other ready-made combinations in the Handymade range. If you make your own combination, check the tightness and dispensing with the specific formulation.
- Recycling – the bottle is made of PET and the pump combines polypropylene and aluminium. Before disposal, unscrew the pump and recycle the two parts separately.
Scrubs with solid particles, products with pieces of herbs and thick butters do not belong in a bottle with a pump. Particles clog the dip tube or valve and the pump stops working.
Frequently asked questions
Parameters
Plastic bottle, white, 24/410, without cap, 200 ml
- Product colour
- White
- Country of origin
- European Union
- Nominal capacity
- 200
- Diameter
- 47 mm
- Thread type
- GL24
- Height
- 150 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
































































