PLASTIC BOTTLES
White Plastic Bottle, Black Lotion Pump With Glossy Silver Collar, 250 ml
Pack size100 ml150 ml200 ml250 ml300 ml
The white plastic bottle with a volume of 250 ml and a black and silver pump is ready-made packaging for liquid cosmetic products that are dispensed by pressing: liquid soaps, shower gels, shampoos, body and face… full description
Lowest price in the last 30 days: €1.28
Total for 1 pcs: €1.28
Quantities add up across all combinations of this bottle.
Product description
The white plastic bottle with a volume of 250 ml and a black and silver pump is ready-made packaging for liquid cosmetic products that are dispensed by pressing: liquid soaps, shower gels, shampoos, body and face lotions or massage oils. The bottle is made of PET, so it is light and does not break if dropped in the bathroom. The white colour conceals the contents and reduces the amount of light reaching them, and black as well as coloured printing stands out well on it. The pump with a 24/410 neck finish screws directly onto the bottle, so the set does not have to be put together from two separate items.
One press dispenses approximately 1 ml of the contents, which corresponds to a common single dose of hand soap or lotion. The dip tube reaches the bottom, so almost all of the contents can be used up without tilting the bottle. The pump body is made of polypropylene and the silver element is aluminium. The set is declared as suitable for contact with cosmetics. The certificate for direct food contact applies only to the bottle on its own, while the set as a whole is intended for cosmetics.
What it is suitable for
- Liquid soap and shower gel – one-handed dispensing at the sink or in the shower, without unscrewing a cap, so no water gets into the contents.
- Shampoo and conditioner – a 1 ml dose measures the amount more precisely than pouring from an open bottle.
- Body and face lotion – thinner emulsions pass through the dip tube; for thicker creams, we recommend checking the dispensing in the finished formulation.
- Massage and body oils – the pump dispenses oil in small amounts and it does not run down the side of the bottle as it does when pouring from an open neck.
Filling and volume
The nominal volume is the amount the packaging is designed for in normal filling. The total brimful volume is the physical volume of the bottle up to the neck and is always larger. The difference between them provides room for the dip tube and the pump body, for the air above the surface and for slight expansion of the contents when the temperature changes. The bottle is therefore filled up to the nominal volume. If the bottle is overfilled, part of the contents is pushed out through the neck when the pump is screwed on.
Before filling a whole batch, fill one bottle, screw on the pump and press it several times. This lets you check that the dip tube draws up the contents, that the dose is the expected size and that the product does not leak around the thread.
Good to know
Before first use, wash the packaging, disinfect it if needed and leave it to dry completely. Rinse the dip tube of the pump by pumping clean water through it and then air, so that no residues remain inside. Both the bottle and the pump can be reused. After emptying, simply wash and dry them in the same way. When changing the product, thorough pumping through is essential, otherwise residues of the previous contents will mix with the new product.
The packaging should not come into contact with aggressive chemicals. For formulations with a higher proportion of essential oils or solvents, we recommend checking how the plastic behaves in the finished formulation, as well as for contents that could react with the aluminium element of the pump. The pump is not intended for thick ointments or balms, which cannot be drawn up through the dip tube.
The bottle has a 24/410 neck, so other closures with the same neck type from the Handymade range can also be fitted to it. For your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation. After emptying, the PET bottle is recycled as plastic. The pump combines polypropylene and aluminium, so separate it from the bottle before recycling.
The set is not approved for food contact. Only the bottle on its own has a food-contact certificate; once the pump is fitted, use the packaging exclusively for cosmetic products.
Frequently asked questions
Parameters
Plastic bottle, white, 24/410, without cap, 250 ml
- Product colour
- White
- Country of origin
- European Union
- Nominal capacity
- 250
- Diameter
- 50 mm
- Thread type
- GL24
- Height
- 164 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
































































