PLASTIC BOTTLES
White Plastic Bottle, White Lotion Pump With Overcap, Glossy Gold, 300 ml
Pack size100 ml200 ml250 ml300 ml
The set of a 300 ml white PET bottle and a white and gold pump with overcap is ready-made packaging for liquid and creamy products that are dispensed by pressing. full description
Lowest price in the last 30 days: €1.62
Total for 1 pcs: €1.62
Quantities add up across all combinations of this bottle.
Product description
The set of a 300 ml white PET bottle and a white and gold pump with overcap is ready-made packaging for liquid and creamy products that are dispensed by pressing. It suits body lotions, shampoos, shower gels, liquid hand soaps, conditioners and lighter body creams, that is, wherever the customer repeatedly needs a smaller dose without opening the packaging. White opaque plastic limits the light reaching the contents, which you will appreciate with formulations containing vegetable oils or light-sensitive active ingredients. The bottle is lightweight, does not break when dropped and withstands the environment of a shower or sink.
The set is declared as suitable for contact with cosmetics. Only the bottle has a separate certificate for direct food contact; the pump does not, so the assembled set is intended for cosmetic products.
What the set is suitable for
- Body lotions and light creams – thinner emulsions pass through the dip tube and the pump valve, and one press dispenses enough to treat the hands or a part of the body.
- Shampoos, conditioners and shower gels – the 300 ml volume corresponds to a common bathroom pack size, the pump prevents excessive use and the contents do not spill.
- Liquid soaps and cleansing hand gels – dispensing at the sink is done with one hand, and the overcap protects the pump head from dust during storage and transport.
- Massage oils and oil blends – the pump also handles thin oils, but we recommend checking the compatibility of PET with a higher proportion of essential oils on your specific formulation.
Filling and dispensing
The 300 ml volume is nominal, that is, the quantity the bottle is designed for in normal filling. The actual volume up to the brim of the neck is larger. The difference is a reserve for the dip tube and the pump valve and for the expansion of the contents when the temperature changes. Fill up to the nominal volume, never to the brim, otherwise the contents will be pushed out through the thread when the pump is screwed on.
One press dispenses approximately 0.2 ml of product. Before first use, press the pump several times until the dip tube fills and the product starts to come out.
The pump dip tube is longer than the height of the bottle. Before first assembly, fit the pump, check that the dip tube does not bend at the bottom, and if necessary trim it straight so that it reaches just above the bottom. A bent dip tube draws in air and the pump then dispenses unevenly.
The bottle has a 24/410 neck finish. The pump can later be replaced with another closure for the same neck type from the Handymade range. For your own combination, we recommend checking the tightness, the dispensing and the behaviour of the packaging with your specific formulation.
Good to know
Before the first filling, wash the packaging, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the pump with water and pump it until clean water comes out. Residues in the dip tube are a common source of contamination.
PET does not tolerate higher temperatures. Let the finished emulsion cool to room temperature and only then fill the bottle. Hot product may deform the wall of the bottle and affect the tightness of the thread. For products with a high proportion of ethanol or concentrated essential oils, check the suitability of the material on your specific formulation.
The pump is not intended for products with solid particles, for example scrubs with sugar, salt or ground kernels. The particles clog the valve and the pump stops working. It is also unsuitable for thick butters and solid creams, which the dip tube cannot draw up.
The packaging can be reused: after emptying, simply wash, disinfect and dry it. When changing the type of product, we recommend taking the pump apart and rinsing the dip tube separately. The bottle is made of PET and the pump combines polypropylene with aluminium, so for recycling separate the bottle and the pump and sort them by material.
Frequently asked questions
Parameters
Plastic bottle, white, 24/410, without cap, 300 ml
White Lotion Pump With Overcap, 24/410, Glossy Gold, 200 mm
- Country of origin
- European Union
- Diameter
- 27,5 mm
- Thread type
- 24/410
- Height
- 45 mm
- Tube length
- 220 mm
- Dose
- 0,2 ml
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

































































