+421 950 333 113info@handymade.store−10 %Shop now

PLASTIC BOTTLES

White Plastic Bottle, White Lotion Pump With Overcap, Glossy Gold, 250 ml

Pack size100 ml200 ml250 ml300 ml

White plastic bottle with a volume of 250 ml and a fitted pump with overcap in a white and gold finish. full description

AvailabilityIn stock · 606 pcs
Product codeO24PB250-OVD24PZBL
€1.42incl. VAT

Lowest price in the last 30 days: €1.42

Volume pricing
1–199 pcs€1.42Your price
200–999 pcs€1.30−8 %
1000–4999 pcs€1.25−12 %
from 5000 pcs€1.12−21 %

Total for 1 pcs: €1.42

Quantities add up across all combinations of this bottle.

Product description

White plastic bottle with a volume of 250 ml and a fitted pump with overcap in a white and gold finish. The set is ready for filling with liquid and medium-thick cosmetic products that are dispensed in doses: body lotion, face emulsion, liquid soap, shampoo, conditioner or massage oil. One press of the head dispenses a small amount of product, without unscrewing the closure and without your hands coming into contact with the contents.

The opaque white wall made of PET limits the amount of light reaching the contents. This is useful for emulsions with vegetable oils, vitamins or essential oils, which lose their effectiveness more quickly in light. The plastic is lightweight and does not break, so the bottle holds up well in the bathroom, on a salon shelf and during shipping. The gold element on the pump head complements the white body of the bottle.


Pump with overcap

The pump screws onto the 24/410 neck finish. The overcap placed over the head protects the outlet from dust and prevents accidental pressing during transport or in a bag. Before use, remove the overcap and press the head several times until the dip tube fills, and the packaging is ready to dispense.

One dose is approximately 0.2 ml. This amount suits products that are applied in small quantities, such as face emulsions or oils. For body lotion or liquid soap, expect several presses per use. The dip tube is longer than the bottle. After fitting the pump, shorten the dip tube with a sharp knife so that it ends just above the bottom, otherwise the entire contents cannot be drawn out.

The pump works with liquid and medium-thick products. Thick creams, balms and products with scrub particles clog the head or are not dispensed at all. For these, choose a jar or container.


Volume and filling

The nominal volume is the amount the packaging is designed for under normal filling. The brimful capacity is the physical volume of the bottle up to the neck and is always slightly larger. The difference leaves headspace for the dip tube with the pump and for the expansion of the contents when the temperature changes. The bottle should therefore be filled to the nominal 250 ml, not to the brim, otherwise part of the contents will be pushed out when the pump is screwed on.

Before the first filling, rinse the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Treat the pump on the inside as well: pump pure alcohol through it several times and then water. The packaging can be reused; after emptying, simply wash it and disinfect it again. Residues of the previous product in the dip tube and in the pump mechanism are the most common source of contamination of the new contents.


Good to know

  • Contact with cosmetics – the bottle and the pump are both declared suitable for use with cosmetic products, and the set as a whole is intended for cosmetics.
  • Food – the bottle on its own has a certificate for direct contact with food, but the pump does not. The set with the pump is therefore not approved for food use.
  • Water-based and oil-based products – PET is suitable for water-based products, emulsions and vegetable oils. For products with a high proportion of essential oils or with solvents, check how the packaging behaves with your specific formulation, as aggressive chemicals are not good for the plastic.
  • Heat – fill only with a product that has cooled down, as a hot emulsion can deform the PET. Do not sterilise the bottle by boiling.
  • Other closures – other closures from the Handymade range with the same type of thread also fit the 24/410 neck; you can find ready-made combinations in our range. If you make your own combination, check the tightness with your specific product.
  • Recycling – the bottle is made of PET, while the pump combines polypropylene and aluminium. Before disposal, unscrew it from the bottle and hand it in separately.

When shipping filled packaging, fit the overcap and pack the bottle upright. If it is turned upside down, the contents may leak from the pump head.


Frequently asked questions

Does the white plastic bottle protect the contents from light?
Yes, the opaque white PET wall limits the amount of light reaching the contents. It is therefore suitable for emulsions and oils with light-sensitive active ingredients, for example with vitamins or vegetable oils prone to oxidation. However, the plastic does not protect against heat, so store the packaging away from direct sunlight and heat sources.
Which products is the 24/410 pump with overcap suitable for?
The pump is intended for liquid and medium-thick products: body lotion, face emulsion, liquid soap, shampoo, conditioner or oil. Thick creams, balms and products with particles will not pass through it or will clog the mechanism. One dose is approximately 0.2 ml, and for larger amounts you press it several times.
How much product can you actually put in the bottle with the pump?
The bottle is filled to the nominal volume of 250 ml, not to the brim. Once screwed on, the dip tube and the pump take up part of the space in the neck, so a headspace must remain above the liquid level. A bottle filled to the neck would overflow when the pump is fitted, and the contents would have nowhere to expand when the temperature changes.
Can the plastic bottle with the pump be reused?
Yes, after emptying, both the bottle and the pump can be washed and used again. Pump alcohol through the pump and then water to remove residues of the previous product from the dip tube and the mechanism. Let all parts dry completely before refilling. Do not use hot water or sterilisation by boiling, as PET deforms with heat.
Is the bottle and pump set suitable for food?
No, the set as a whole is not approved for contact with food. The bottle on its own has a certificate for direct contact with food, while the pump with overcap does not. For homemade oils, syrups or herbal infusions, use a bottle with a different closure that has a food-contact certificate. The set with the pump is intended for cosmetic products.
Can I fill the plastic bottle with a product containing essential oils?
Yes, PET tolerates the usual cosmetic usage rates of essential oils in an emulsion or in an oil. For products with a high concentration of essential oils, pure essential oils or solvents, check how the packaging behaves with your specific formulation, as the bottle is not intended for aggressive chemicals. If in doubt, choose a glass bottle.

Parameters

Plastic bottle, white, 24/410, without cap, 250 ml

Product colour
White
Country of origin
European Union
Nominal capacity
250
Diameter
50 mm
Thread type
GL24
Height
164 mm
Product material
PETPlastic

White Lotion Pump With Overcap, 24/410, Glossy Gold, 200 mm

Product colour
GoldWhite
Country of origin
European Union
Diameter
27,5 mm
Thread type
24/410
Height
45 mm
Tube length
220 mm
Product material
AluminiumPPPlastic
Dose
0,2 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, white, 24/410, without cap, 250 ml · O24PB250PDF ↓
White Lotion Pump With Overcap, 24/410, Glossy Gold, 200 mm · OVD24PZBLPDF ↓
PDSProduct Data Sheet
Plastic bottle, white, 24/410, without cap, 250 ml · O24PB250PDF ↓
White Lotion Pump With Overcap, 24/410, Glossy Gold, 200 mm · OVD24PZBLPDF ↓
DrawingTechnical drawing
Plastic bottle, white, 24/410, without cap, 250 ml · O24PB250PDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.