PLASTIC BOTTLES
White Plastic Bottle, White Lotion Pump With Overcap, Glossy Gold, 100 ml
Pack size100 ml200 ml250 ml300 ml
Plastic bottle, white, pump with overcap, white and gold, 100 ml A bottle with a pump for 100 ml of liquid and semi-liquid cosmetics that you want to dispense in small doses without unscrewing a cap: body lotions, light… full description
Lowest price in the last 30 days: €1.21
Total for 1 pcs: €1.21
Quantities add up across all combinations of this bottle.
Product description
Plastic bottle, white, pump with overcap, white and gold, 100 ml
A bottle with a pump for 100 ml of liquid and semi-liquid cosmetics that you want to dispense in small doses without unscrewing a cap: body lotions, light creams, serums, liquid soaps or cleansing gels. The white PET bottle reduces light transmission, so the contents are not exposed to direct light on the shelf, and it does not break if dropped. The white and gold pump dispenses a small dose when pressed, and the product does not come into contact with your fingers. The set is declared suitable for contact with cosmetics.
What it is suitable for
- Body lotions and light face creams – thinner emulsions are drawn up by the pump without any problem, and one press corresponds to the amount needed to treat a smaller area of skin.
- Serums and fluids – a small dose suits products of which you use only a few drops. The contents of the bottle stay closed off from air and impurities.
- Liquid soaps, cleansing gels and shower gels – at the sink or in the shower, a pump is more convenient than a cap that has to be opened with wet hands.
- Hair conditioners and leave-in hair products – as long as the texture is liquid, the pump dispenses a consistent amount each time.
- Samples and travel sizes – the volume corresponds to the usual limit for liquids in hand luggage, and the overcap protects the pump head from being pressed accidentally.
How to use the set
Fill the bottle up to the nominal volume, fit the pump and tighten it on the 24/410 neck finish. The dip tube of the pump is longer than the bottle, so before first use shorten it with a sharp knife so that it reaches the bottom without bending. An angled cut prevents the end from sticking to the bottom, and the product is drawn up to the last millilitres.
When using it for the first time, press the pump head several times until the pump fills with the contents. After that, it dispenses approximately 0.2 ml per press. This is an indicative figure, and the actual amount also depends on the viscosity of the product. The overcap is placed on the pump head after each use. It covers the outlet against dust and reduces the risk of the pump being pressed during transport.
The pump is designed for liquid and semi-liquid textures. With thicker creams or balms, the contents may not be drawn up or the doses may be uneven. We recommend testing how your specific formulation behaves on a small amount before filling a whole batch.
Nominal volume and filling
The nominal volume is the volume the bottle is intended for under normal filling. The brimful volume, that is, the physical volume up to the neck, is slightly larger. The difference provides a reserve for the dip tube and the lower part of the pump, which is immersed in the contents once fitted, and for the expansion of the product when the temperature changes. The bottle should therefore be filled to the nominal volume, not up to the neck. If it were filled to the brim, the contents would be pushed out through the thread when the pump is fitted.
Good to know
Only the bottle on its own has a certificate for direct food contact. The pump does not have one, so the set as a whole is intended for cosmetics. If you plan to package homemade oils or syrups, choose a separate bottle with a closure that has a food-contact certificate.
The bottle must be protected from heat, so emulsions and gels should be left to cool to room temperature before filling. The packaging should not be exposed to aggressive chemicals. With perfumes, alcohol-based tinctures or products with a higher content of essential oils, check whether the wall of the bottle becomes cloudy or deformed over time.
Before the first filling, wash both the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the dip tube or on the wall of the bottle would introduce a microbial load into the product that the preservative system may not account for.
The set can be used repeatedly if it is washed thoroughly after it has been emptied. For recycling, the bottle and the pump are separated: the bottle is made of PET, while the pump contains polypropylene and aluminium, so they belong in different waste streams.
You can find closures with the same neck type and ready-made combinations of packaging and closure in the Handymade range. If you are making your own combination, we recommend checking the tightness and dispensing with your specific formulation.
Frequently asked questions
Parameters
White plastic bottle, 24/410, without cap, 100 ml
White Lotion Pump With Overcap, 24/410, Glossy Gold, 200 mm
- Country of origin
- European Union
- Diameter
- 27,5 mm
- Thread type
- 24/410
- Height
- 45 mm
- Tube length
- 220 mm
- Dose
- 0,2 ml
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





































































