PLASTIC BOTTLES
White Plastic Bottle, White Lotion Pump With Overcap, Glossy Gold, 200 ml
Pack size100 ml200 ml250 ml300 ml
The white plastic 200 ml bottle and the white and gold pump with overcap make a ready-to-use packaging set for liquid and semi-liquid cosmetic products that are dispensed repeatedly without unscrewing. full description
Lowest price in the last 30 days: €1.42
Total for 1 pcs: €1.42
Quantities add up across all combinations of this bottle.
Product description
The white plastic 200 ml bottle and the white and gold pump with overcap make a ready-to-use packaging set for liquid and semi-liquid cosmetic products that are dispensed repeatedly without unscrewing. The pump delivers a measured dose with a single press, and the overcap protects the head from dust and from accidental pressing during storage or in the bathroom. Both the bottle and the pump have a 24/410 neck finish, so they fit together without any further adjustment.
The bottle is made of PET, is lightweight and does not break when dropped. The opaque white wall dims light, which helps with formulations containing sensitive oils or active ingredients. The gold colour of the head suits gift or retail cosmetics, and the set works just as well for home production of body lotion, liquid soap or shampoo. The whole set is declared suitable for contact with cosmetic products.
How to use the set
The pump dispenses approximately 0.2 ml per press. This amount suits facial emulsions, higher-viscosity serums and liquid soaps, where the customer wants to keep the dose under control. For body lotions or shampoos, you press several times.
Before first use, the pump needs to be primed. After filling the bottle and screwing on the pump, press the head several times until the mechanism fills with the contents and begins to dispense evenly. Very thick creams and ointment-like consistencies are dispensed poorly or not at all through a pump with a narrow tube, so we recommend checking suitability for your specific formulation on a small sample.
The bottle is filled up to the nominal volume, that is, the volume it is designed for in normal filling. The total brim-full volume is larger, and the difference provides a reserve for the tube and the pump body and for the expansion of the contents when the temperature changes. Filling up to the neck causes overflow when the pump is screwed on.
What it is suitable for
- Body and face lotions – light O/W emulsions that flow freely and are dispensed by the pump without problems.
- Liquid soaps and shower gels – the 200 ml volume is enough for both the washbasin and the shower, and dispensing with a single press limits waste.
- Shampoos and conditioners with a liquid to slightly creamy consistency.
- Massage and body oils – the pump dispenses oils, but with very thin oils the head may drip for a moment after pressing.
- Hand gels with lower viscosity.
For thick creams, butters or balms, a jar or container is more suitable.
Good to know
- Preparation before filling – wash the bottle and the pump, disinfect them with ethanol or isopropyl alcohol and let them dry completely. Moisture inside the packaging is a common source of contamination of the finished product.
- Filling temperature – PET is not intended for hot filling. Let emulsions and soaps cool to room temperature before filling.
- Unsuitable contents – pure essential oils, concentrated solvents and aggressive chemicals can damage the plastic. For formulations with a higher proportion of essential oils or alcohol, we recommend a stability test in the packaging.
- Tightness during transport – the overcap protects the head but does not replace a transport closure. When travelling or shipping finished products, check that the pump does not leak with your formulation when lying on its side.
- Reuse – you can reuse the bottle and the pump after thorough washing and drying. Rinse the tube and the mechanism with warm water so that no residues of the previous contents remain in them.
- Recycling – the bottle is made of PET and belongs in plastic waste. The pump combines polypropylene and aluminium, so separate it from the bottle before disposal.
- Other closures – closures, sprayers and pumps with the same 24/410 neck finish fit the bottle, and you can find ready-made combinations in the Handymade range. If you make your own combination, check the tightness and dispensing with your specific formulation.
If the pump dispenses irregularly after priming or draws in air, check that the tube is not kinked and that the pump is screwed on straight. Screwing the pump on crooked is a common cause of leaks at the neck.
Only the bottle on its own has a certificate for direct food contact. The pump does not have one, so the set as a whole is not approved for food and is intended for cosmetic products.
Frequently asked questions
Parameters
Plastic bottle, white, 24/410, without cap, 200 ml
- Product colour
- White
- Country of origin
- European Union
- Nominal capacity
- 200
- Diameter
- 47 mm
- Thread type
- GL24
- Height
- 150 mm
White Lotion Pump With Overcap, 24/410, Glossy Gold, 200 mm
- Country of origin
- European Union
- Diameter
- 27,5 mm
- Thread type
- 24/410
- Height
- 45 mm
- Tube length
- 220 mm
- Dose
- 0,2 ml
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

































































