PLASTIC BOTTLES
White Plastic Bottle, White Spray With Glossy Silver Collar, 150 ml
Pack size100 ml150 ml200 ml250 ml300 ml
The white plastic bottle with a mini trigger sprayer is a ready-made set for toners, hydrosols and facial or hair mists , that is, thin, water-based preparations applied by spraying. full description
Lowest price in the last 30 days: €1.35
Total for 1 pcs: €1.35
Quantities add up across all combinations of this bottle.
Product description
The white plastic bottle with a mini trigger sprayer is a ready-made set for toners, hydrosols and facial or hair mists, that is, thin, water-based preparations applied by spraying. The opaque white wall hides the contents, and PET is lightweight and does not break when dropped, so the bottle holds up in the bathroom, on the road and in a handbag. The nominal volume of 150 ml matches the usual size of a homemade toner or refreshing spray. The white sprayer with a glossy silver collar matches the bottle in colour, so the set needs no further finishing touches.
What the set consists of
- Bottle – white PET, opaque, with a smooth wall.
- Sprayer – mini trigger sprayer with a white head, a glossy silver collar and a clear overcap. Each press releases a small amount of liquid dispersed into a mist, and the dip tube reaches the bottom of the bottle.
Both components are declared as suitable for contact with cosmetics. The declarations of conformity are available with the product.
What the set is suited for
The mini trigger sprayer works with liquids that flow like water. This bottle is therefore suited to facial toners, pure hydrosols, mists with glycerine or low concentrations of hyaluronic acid, thin hair sprays, make-up removing waters and sprays to refresh the skin. For alcohol-based toners, sprays based on ethanol, and formulations with a higher proportion of essential oils or solvents, we recommend checking beforehand that the bottle wall and the sprayer seal tolerate the contents.
Oils, oil serums and emulsions are not suitable for this set. The sprayer cannot disperse thicker contents into a mist, so the liquid tends to run out of the nozzle or the nozzle stays blocked. For oil-based products, choose a bottle with a pump or a dropper.
Nominal and brimful volume
The bottle is filled up to the nominal volume, that is, the amount the packaging is designed for under normal filling. The brimful volume is the physical volume up to the neck and is slightly larger. The difference between the two values provides room for the sprayer’s dip tube, for the air above the liquid and for the expansion of the contents when the temperature changes. A bottle filled to the neck overflows when the sprayer is screwed on and is difficult to handle.
Good to know
Before filling for the first time, wash the bottle in warm water with washing-up liquid, rinse it, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Flush the sprayer by spraying several doses of clean water or alcohol through it to clear any production residues from the tube and the nozzle.
The dip tube of the sprayer may be longer than the height of the bottle requires. Before first use, shorten it with a diagonal cut so that it ends just above the bottom, and press the sprayer several times to prime it until it fills and starts to dispense evenly.
One press releases approximately 0.12 ml of liquid. This value can be used as an approximate figure when calculating the consumption of active ingredients in a mist or estimating how many applications the bottle will last.
PET does not tolerate higher temperatures. Fill the bottle with cooled contents, do not leave it in direct sunlight or near a heat source, and do not wash it in hot water, as the wall may become deformed.
Only the bottle on its own has a certificate for direct contact with food. The sprayer has no such assessment, so the set as a whole is intended for cosmetic preparations, not for syrups, vinegars or herbal infusions.
After thorough washing and disinfection, the bottle can be refilled. Flush the sprayer with clean water before further use, and when switching to a different fragrance or a different type of contents, it is better to replace it with a new one. You can find other closures with the same neck type and further ready-made combinations of bottle and closure in the Handymade range. If you make your own combination, we recommend checking the tightness and the dispensing.
The bottle is made of PET, which goes in separately collected plastic waste. The sprayer combines plastic with an aluminium collar, so unscrew it from the bottle before disposal.
Frequently asked questions
Parameters
White plastic bottle, 150 ml 24/410, without cap
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.


































































