PLASTIC BOTTLES
White Plastic Bottle, White Spray With Glossy Silver Collar, 200 ml
Pack size100 ml150 ml200 ml250 ml300 ml
This white plastic bottle with a capacity of 200 ml and a mechanical fine mist sprayer is designed for thin water-based products that are applied as a spray: facial toners, hydrosols, refreshing face and body mists,… full description
Lowest price in the last 30 days: €1.33
Total for 1 pcs: €1.33
Quantities add up across all combinations of this bottle.
Product description
This white plastic bottle with a capacity of 200 ml and a mechanical fine mist sprayer is designed for thin water-based products that are applied as a spray: facial toners, hydrosols, refreshing face and body mists, light hair sprays and water-based room fragrances. The bottle is made of PET, it is lightweight and does not break if dropped, so it is also suitable for travel, the bathroom or a handbag. The white colour does not show the contents, the set has a uniform look and the glossy silver collar on the sprayer completes its appearance.
The set comes as a ready-made pair: a bottle with a 24/410 neck finish and a sprayer with the same thread and a dip tube. It is declared as suitable for contact with cosmetics. The bottle on its own has certification for direct food contact; the set as a whole is intended for cosmetic products.
What it is suitable for
- Facial toners and hydrosols – the sprayer disperses thin water-based liquids into a fine mist that is applied evenly and without your hands touching the contents.
- Hair and body sprays – smoothing water-based sprays, refreshing mists with hydrosol or thinner alcohol-based products for larger areas.
- Room and fabric sprays – aqueous solutions with solubilised fragrance, for which a larger bottle size is worthwhile.
- Cleaning and disinfectant solutions – with alcohol-based contents, we recommend testing the behaviour of the bottle and the seal with the specific concentration in advance.
How the set works
The sprayer works mechanically, without propellant. Pressing the actuator draws the contents up through the dip tube and disperses them through the nozzle. One press releases approximately 0.12 ml, which corresponds to a typical application of a facial toner or face mist. The dip tube reaches the bottom of the bottle, so the contents can be used almost completely.
The sprayer is built for water-based and thin liquids. It disperses oils, emulsions and thick solutions poorly or not at all. With such contents, we recommend testing one piece before filling a larger batch.
Filling and capacity
Nominal capacity is the volume the bottle is designed for in normal filling. Brimful capacity is the physical volume up to the neck. The difference between them is the headspace for the sprayer’s dip tube, for the air above the liquid and for the expansion of the contents when the temperature changes. Fill to the nominal capacity, not to the brim. If filled up to the neck, some of the contents would be pushed out when the sprayer is screwed on.
The bottle has a 24/410 neck finish, so it can also be combined with other closures with the same neck type. You will find further ready-made combinations of packaging and closures in the Handymade range. If you put together your own combination, we recommend checking the seal, the dispensing and the behaviour of the packaging with your specific formulation.
Good to know
Before filling for the first time, wash the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Moisture in an empty bottle puts unnecessary strain on the preservative system of the product.
PET is not intended for hot filling. Let the water phase, toner or finished spray cool to room temperature before filling. For contents with a higher proportion of essential oils or alcohol, we recommend checking compatibility in a small test.
After thorough washing and disinfection, the bottle and the sprayer can be reused. Rinse the dip tube and the nozzle with clean water and let them dry so that no residue of the previous contents remains. The bottle is made of PET and belongs in plastic waste. The sprayer contains several materials, so separate it from the bottle before recycling.
Frequently asked questions
Parameters
Plastic bottle, white, 24/410, without cap, 200 ml
- Product colour
- White
- Country of origin
- European Union
- Nominal capacity
- 200
- Diameter
- 47 mm
- Thread type
- GL24
- Height
- 150 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

































































