PLASTIC BOTTLES
White Plastic Bottle, White Spray With Glossy Silver Collar, 100 ml
Pack size100 ml150 ml200 ml250 ml300 ml
This set of a white PET bottle with a capacity of 100 ml and a white mini trigger sprayer with a glossy silver collar is designed for packaging facial toners, hydrosols, refreshing sprays and other thin liquids applied… full description
Lowest price in the last 30 days: €1.08
Save €0.04 with this set
Total for 1 pcs: €1.08
Quantities add up across all combinations of this bottle.
Product description
This set of a white PET bottle with a capacity of 100 ml and a white mini trigger sprayer with a glossy silver collar is designed for packaging facial toners, hydrosols, refreshing sprays and other thin liquids applied by spraying. PET is lightweight and shatterproof, so the bottle can be carried in a handbag or taken travelling. Both parts have a 24/410 neck finish, so the sprayer fits the bottle without any need to look for a separate closure.
The packaging is declared as suitable for use with cosmetic products. The white bottle with a white sprayer and glossy collar has a clean, uniform look and suits a home workshop as well as a small brand that wants all its sprays to look the same.
What it is suitable for
- Facial toners and hydrosols – the sprayer disperses low-viscosity water-based contents into a fine mist that is applied evenly and without a cotton pad.
- Refreshing and setting face sprays – sprays with glycerine, aloe or solubilised essential oils, as long as they remain thin.
- Sprays for hair – hair tonics, leave-in sea salt sprays or light water-based spray conditioners.
- Body fragrances and water-based refreshers – thin water and alcohol blends. With a higher proportion of alcohol, it is worth checking how the plastic behaves with your specific formulation.
- Samples and travel packaging – the 100 ml capacity is well suited to small production runs, test batches and travel packaging.
The mini trigger sprayer is built for thin, water-based liquids. Thick serums, emulsions and oils do not spray evenly and clog the mechanism. For such contents, a pump or a dropper is more suitable.
How the set works
With each press, the sprayer releases approximately 0.12 ml of the contents. The dose is the same every time, which helps you apply toners and sprays evenly and estimate consumption. The contents are drawn up through the dip tube from the bottom of the bottle and dispersed into a fine mist at the nozzle.
The sprayer dip tube is supplied longer than the height of the bottle. Before first use, trim it with a diagonal cut so that it ends just above the bottom. The sprayer will then draw out almost all of the contents and the tube will not bend inside the bottle.
When filling, allow for the difference between the nominal and the total capacity. The nominal capacity is the amount the bottle is designed to hold when filled normally. The total brimful capacity is the physical volume up to the neck and is slightly larger. This difference provides space for the dip tube and the sprayer mechanism. Fill the bottle to its nominal capacity, not to the brim, otherwise the contents will overflow when you screw on the sprayer.
Good to know
- Preparation before first filling – wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. Pump ethanol through the sprayer several times and also leave it to dry, so that no water remains in the dip tube and nozzle.
- Material and contents – the bottle is made of PET, the sprayer of polypropylene with an aluminium collar. For contents with a higher proportion of essential oils, alcohol or solvents, we recommend checking the seal, the function of the mechanism and the appearance of the packaging with your specific formulation.
- Filling temperature – PET deforms with heat, so fill the bottle only once the contents have cooled.
- Reuse – after thorough washing, the bottle can be used again. The sprayer mechanism is harder to clean; when changing products, rinse it several times with clean water and then with ethanol so that fragrances and residues are not carried over.
- Other closures – the bottle has a 24/410 neck, so other closures with the same neck finish and ready-made combinations from the Handymade range also fit it. If you put together your own combination, we recommend checking the seal and dispensing.
- Recycling – the PET bottle belongs in sorted plastic waste. Unscrew the sprayer before disposal; besides plastic it also contains aluminium, so it is disposed of separately from the bottle.
Only the bottle on its own is certified for direct contact with food. The sprayer does not have this certification, so the set as a whole is intended for cosmetic use, not for packaging food.
Frequently asked questions
Parameters
White plastic bottle, 24/410, without cap, 100 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





































































