Product description

The ZENISOAPBASE soap base is used for the production of soaps and soap bouquets. It has a plant-based base and the resulting soap has excellent foaming properties and, thanks to its high glycerin content, it also moisturises the skin very well. It remains liquid for a relatively long time, so it can be used even for more complex projects. During longer standing, there is no loss of volume of the soap casts (important especially when creating bouquets). The soap base is free from animal fats and oils – 100% vegan.

When colouring the base with ZENICOLOR colourants, it is better to mix 70% transparent CLEAR base and 30% white WHITE base to avoid excessive consumption of colourants.

Melting temperature: 65°C
Do not exceed a temperature of 75°C when heating!

Working with the soap base is not demanding at all. Simply cut the desired amount of soap base into smaller pieces, which will speed up the melting phase of the base. Slowly heat the base in a water bath or in a microwave. Note that the base must not boil, so heat it slowly. You can add a few drops of essential or fragrance oil, liquid or powder colourant and, for a special touch, dried herbs to the melted base.

Stir slowly to avoid creating unnecessary air bubbles that would form holes after solidification. Pour the soap base into the prepared mould. Immediately after pouring, we recommend applying a few sprays of a bubble remover – this is 99% isopropanol – using an atomiser. The final step is to allow it to solidify. After unmoulding, you can use the soap immediately, but we recommend letting the base stand for about 2 weeks for better properties.

More detailed information about the product quality can be found in the certificate, which we update with each new batch.

All supplied raw materials are of cosmetic grade, not suitable for internal use. Use appropriate protective equipment when handling.