+421 950 333 113info@handymade.store−10 %Shop now

ALUMINUM BOTTLES

Aluminium Bottle, Black Lotion Pump With Glossy Silver Collar, 100 ml

Pack size50 ml100 ml200 ml225 ml

The 100 ml aluminium bottle with a black and silver pump is a ready-made set for liquid and semi-liquid cosmetic products that are dispensed by pressing the pump. full description

AvailabilityIn stock · 229 pcs
Product codeO24HS100-OVD24CS
€3.08incl. VAT

Lowest price in the last 30 days: €3.08

Volume pricing
1–199 pcs€3.08Your price
200–999 pcs€2.82−8 %
1000–4999 pcs€2.62−15 %
from 5000 pcs€2.31−25 %

Total for 1 pcs: €3.08

Quantities add up across all combinations of this bottle.

Product description

The 100 ml aluminium bottle with a black and silver pump is a ready-made set for liquid and semi-liquid cosmetic products that are dispensed by pressing the pump. Aluminium blocks light, so it protects contents that are sensitive to UV radiation, and the bottle does not break if dropped. With each press, the pump dispenses approximately 1 ml of product, which corresponds to one dose of liquid soap or body lotion.

The set consists of two parts with the same 24/410 neck finish, so you do not need to choose a separate closure or check whether it will seal. Both the bottle and the pump are declared as suitable for contact with cosmetic products. The set does not have a food-contact certificate, so it should not be used for homemade oils or syrups.


Suitable uses

  • Liquid soaps and shower gels – the pump dispenses the same amount every time, nothing spills, and the bottle does not break if it slips from wet hands.
  • Body lotions and lighter emulsions – the product must be fluid enough for the tube to draw it up; thick creams and butters do not belong in a pump.
  • Massage and body oils – aluminium protects oils from light and so slows down their oxidation, and the oil can be applied without unscrewing a closure.
  • Shampoos and conditioners in travel size – the 100 ml volume meets the limit for liquids in hand luggage and the bottle is lightweight.
  • Samples and test batches – a smaller amount is used up before it has time to change, and dispensing remains hygienic.

How the set works

The pump screws onto the neck of the bottle, the tube reaches the bottom, and when the pump head is pressed, the contents are drawn into the pump. On first use, you need to press the head several times until the system fills. The pump is made of PP plastic combined with aluminium, and the silver part matches the colour of the bottle.

Before first assembly, compare the length of the tube with the height of the bottle. If the tube extends past the bottom, shorten it with a sharp knife so that it ends just above the bottom. The pump will then also draw up the remainder of the contents, and the tube will not bend when screwed on.

The pump handles liquids up to the consistency of body lotion. With thicker emulsions, the time needed to draw the product up increases and the dose is often smaller than 1 ml. Products with fine particles, for example with scrub particles, may block the valve.


Volume and filling

Nominal volume is the amount the bottle is designed for under normal filling, in this case 100 ml. Brimful capacity expresses the physical volume of the bottle up to the neck. The difference between them is a reserve for the tube and the body of the pump, which take up part of the space after screwing on, and for the expansion of the contents with temperature changes. Fill up to the nominal volume, not to the brim, otherwise the contents will be pushed out through the neck when the pump is fitted.


Good to know

Before first filling, wash the bottle and the pump, disinfect them with ethanol or isopropyl alcohol and leave them to dry completely. Residual water would dilute the product and reduce its stability. The set can be reused after washing, but the pump must also be rinsed on the inside: immerse the tube in clean water and pump several times.

Aluminium is a soft metal, and under strong pressure or after a fall a permanent dent will remain on the bottle. This usually does not affect function, but a deformed bottle does not stand as steadily. For aqueous, acidic or alkaline formulations, we recommend checking how the packaging behaves with your specific formulation, for example by setting a filled sample aside for several weeks.

For products with a high alcohol content or with concentrated essential oils, test the tightness of the valve and the tube before you fill the bottle for sale.

The bottle is made of aluminium and the pump of PP plastic with an aluminium part; once empty, the two parts are sorted separately according to material.


Frequently asked questions

Does the aluminium bottle protect the contents from light?
Yes, aluminium is completely opaque and does not let any light through to the contents. The 100 ml aluminium bottle is therefore suitable for vegetable oils, products with vitamins and other ingredients that are harmed by UV radiation. Compared with dark glass, it is lighter and does not break, but you cannot see the contents inside, and the level has to be checked by estimation or by shaking.
How much product does the pump dispense per press?
The pump on the 100 ml aluminium bottle releases approximately 1 ml with a full press of the head and liquid contents. With thicker emulsions, the dose is often smaller and drawing the product up takes longer. Before sale, we recommend measuring the actual dose with your formulation so that the stated number of doses matches reality.
Is the aluminium bottle with pump suitable for liquid soap?
Yes, liquid soaps and shower gels are among the most common uses of this set. The pump dispenses the soap without spilling, and the aluminium bottle withstands the damp environment of a bathroom without the risk of breaking. For soaps with a higher pH, we recommend checking how aluminium behaves with your specific formulation before you fill a larger batch.
Can the aluminium bottle with pump be reused?
Yes, both the bottle and the pump withstand repeated filling if they are washed thoroughly between fills. Rinse the pump by pumping clean water through it, then ethanol or isopropyl alcohol, and leave it to dry. When changing the type of product, for example from an oil to an aqueous gel, bear in mind that oil residues in the tube are harder to wash out.
Which closures other than this pump are suitable for the 100 ml aluminium bottle?
Any closure with a 24/410 neck finish – the same as on this set – can be screwed onto the bottle. You will find closures with this neck finish and ready-made bottle and closure combinations in the Handymade range. For your own combination, we recommend checking the tightness and the behaviour of the closure with your specific formulation.

Parameters

Aluminium bottle, 24/410, 100 ml

Product colour
Silver
Country of origin
China
Nominal capacity
100
Brimful capacity
106 ml
Diameter
40 mm
Thread type
24/410
Height
110 mm
Product material
Aluminium

Plastic pump dispenser, 24/410, black-silver, 180 mm

Product colour
BlackSilver
Country of origin
China
Diameter
27,5 mm
Thread type
24/410
Height
37 mm
Tube length
180 mm
Dose
1 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Plastic pump dispenser, 24/410, black-silver, 180 mm · OVD24CSPDF ↓
PDSProduct Data Sheet
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Plastic pump dispenser, 24/410, black-silver, 180 mm · OVD24CSPDF ↓
DrawingTechnical drawing
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Plastic pump dispenser, 24/410, black-silver, 180 mm · OVD24CSPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.