ALUMINUM BOTTLES
Aluminium Bottle, Black Lotion Pump With Glossy Silver Collar, 225 ml
Pack size50 ml100 ml200 ml225 ml
This aluminium bottle with a capacity of 225 ml and a black and silver pump with a 24/410 neck finish is designed for liquid and medium-viscosity cosmetic products that are dispensed by pressing: body lotions, face and… full description
Lowest price in the last 30 days: €3.18
Total for 1 pcs: €3.18
Quantities add up across all combinations of this bottle.
Product description
This aluminium bottle with a capacity of 225 ml and a black and silver pump with a 24/410 neck finish is designed for liquid and medium-viscosity cosmetic products that are dispensed by pressing: body lotions, face and hair conditioners, liquid hand soaps, shower gels and shampoos. The metal bottle is lightweight, unbreakable and completely protects the contents from light, which is an advantage for formulations with oils, plant extracts or essential oils that spoil more quickly when exposed to light. The pump delivers approximately the same dose with each press, so the product is used hygienically, without opening the packaging and without fingers coming into contact with the contents.
The set is declared suitable for contact with cosmetic products. You will find the declaration of conformity with the product.
What it is suitable for
- Body and face lotions – lighter O/W emulsions flow through the dip tube without problems and the pump dispenses them evenly.
- Liquid soaps and shower gels – the metal bottle will not break if dropped in the bathroom.
- Shampoos and conditioners – the 225 ml capacity is sufficient for regular home production as well as for samples for customers.
- Massage and body oils – dispensing without opening the packaging limits air access to the rest of the contents.
- Cleansers and make-up removers – wherever the product is taken from the packaging repeatedly and the cleanliness of the contents matters.
How to use the set
The pump is screwed onto the neck of the bottle. The dip tube extends into the bottle and draws the contents from the bottom when the head is pressed. One dose corresponds to approximately 1 ml; with thicker products the actual dose may be slightly smaller. Before first use, prime the pump by pressing it several times until the dip tube and mechanism fill with the product and it starts to dispense a full dose.
After screwing on the pump, check that the dip tube reaches the bottom without bending. If it bends or catches on the bottom, shorten it with an angled cut so that it ends just above the bottom of the bottle. A bent dip tube draws in air and the pump then works unevenly.
The consistency of the product determines how comfortably the pump works. It pumps liquid to medium-thick emulsions and gels without resistance. Thick creams, butters or gels with high viscosity may flow slowly through the dip tube and the dose will be incomplete. For such products, we recommend testing how the pump behaves on a small trial sample, or slightly diluting the formulation, or choosing a jar.
Capacity and filling
The nominal capacity of 225 ml is the volume the bottle is designed for in normal filling. The brimful capacity stated in the parameters is the physical volume up to the neck. The difference between them provides a reserve for the dip tube and the pump mechanism, which takes up part of the space once screwed on, and for the expansion of the contents when the temperature changes. Fill the bottle to the nominal capacity, not to the brim. If it is overfilled, the contents may be pushed out through the thread after the pump is fitted and soil the outside of the packaging.
Good to know
Before first filling, we recommend rinsing the bottle and the pump, disinfecting them with isopropyl alcohol or ethanol and leaving them to dry thoroughly. To rinse the pump, pour disinfectant solution into the bottle and pump it through several times, then repeat the same with clean water. Both parts must be completely dry before filling, otherwise water is introduced into the product, along with the risk of microbial contamination.
Aluminium tolerates oils and anhydrous products well. For water-based formulations with low or high pH, or for products with a high proportion of electrolytes, it is advisable to test how the packaging behaves with the specific formulation on a trial sample and to monitor it over several weeks. We also recommend checking how the plastic parts of the pump tolerate higher concentrations of essential oils or solvents, if they are part of the formulation.
The aluminium bottle holds its shape, but it can be permanently deformed by impact or squeezing and will not return to its original shape. Protect it from pressure during transport and do not store the bottles lying down without securing them.
The set can be used repeatedly. Once the contents are used up, simply wash both parts in warm water with a mild cleaning product, run water through the pump until it is clean and disinfect again. For recycling, the pump must be unscrewed: the bottle belongs with metals, while the pump combines plastic and a metal collar and is disposed of according to local rules for mixed packaging.
Closures with the same neck finish type stated in the parameters, and other ready-made combinations of bottle and closure, can be found in the Handymade range. For your own combination, we recommend checking the seal, the dispensing and how the packaging behaves with the specific formulation.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 225 ml
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

















































