ALUMINUM BOTTLES
Aluminium Bottle, Black Lotion Pump With Glossy Silver Collar, 200 ml
Pack size50 ml100 ml200 ml225 ml
This aluminium bottle with a capacity of 200 ml and a black and silver pump is designed for filling with liquid and semi-liquid cosmetic products that are dispensed by pressing: shower gels, shampoos, liquid soaps, body… full description
Lowest price in the last 30 days: €3.28
Total for 1 pcs: €3.28
Quantities add up across all combinations of this bottle.
Product description
This aluminium bottle with a capacity of 200 ml and a black and silver pump is designed for filling with liquid and semi-liquid cosmetic products that are dispensed by pressing: shower gels, shampoos, liquid soaps, body lotions and body or massage oils. Aluminium is lightweight, does not break when dropped and blocks light, so the contents are protected throughout use, which you will appreciate especially with oils and products containing sensitive ingredients. The pump with a 24/410 neck finish dispenses approximately 1 ml per press, which corresponds to a typical single dose for washing or skin care.
Both the bottle and the pump are declared suitable for contact with cosmetic products. The set is not declared suitable for contact with food.
What it is suitable for
- Rinse-off products – shower gel, shampoo or liquid soap can be dispensed with one hand, even with wet fingers, and the bottle will not break in the shower or at the sink.
- Body lotions and lighter emulsions – liquid to medium-thick emulsions pass through the pump tube without problems and are applied in a measured dose.
- Body and massage oils – because the bottle blocks light, the oxidation of oils is slowed down, and the pump prevents spills during massage.
- Salon and travel packaging – low weight and resistance to breakage make it suitable for carrying and for premises where glass is not appropriate.
Filling and dispensing
Fill the bottle to the nominal volume of 200 ml, not to the brim. The brimful capacity is larger, and the difference provides room for the tube and the pump mechanism, as well as for the expansion of the contents when the temperature changes. If the bottle is overfilled, the contents will overflow through the neck when the pump is screwed on.
The pump tube is longer than the height of the bottle. Before fitting the pump for the first time, shorten the tube so that it reaches the bottom, which allows almost all of the contents to be used up. After filling and screwing on the pump, press it several times until the tube fills and the pump starts to dispense an even dose.
The pump is designed for liquid to medium-thick products. Thick creams, body butters and gels with high viscosity either do not pass through the tube or are dispensed unevenly.
Test how the pump behaves with your specific formulation before producing a larger batch. If it jams or dispenses an irregular amount, the product is too thick for it and it is advisable to adjust the viscosity of the formulation.
Good to know
Before first filling, rinse the bottle, disinfect it with isopropyl alcohol (IPA) or ethanol and let it dry completely. Pump a small amount of ethanol through the pump and let it evaporate so that no water remains in the tube.
Emulsions and gels are filled only after they have cooled to room temperature. Hot contents increase the pressure in the closed packaging and change their volume.
We have no information on the internal surface treatment of the bottle. For water-based products, especially those with a low or high pH, we recommend verifying compatibility with a stability test in the filled bottle: after several weeks, check the colour, the smell and the condition of the inner surface.
The plastic parts of the pump are made of polypropylene (PP). For formulations with a higher proportion of essential oils or solvents, check whether the plastic softens and whether the pump still seals after some time.
Aluminium is a soft metal. The bottle does not break if dropped, but it may dent. After thorough washing and disinfection, it can be reused. The inside of the pump is harder to clean, so we recommend reusing it only for the same type of product.
The bottle has a 24/410 neck finish. You will find other closures with the same neck type, as well as ready-made combinations of packaging and closure, in the Handymade range. If you make your own combination, check the seal, the dispensing and the behaviour of the packaging with your specific formulation.
The bottle is made entirely of aluminium and is recycled as metal. The pump combines PP plastic and aluminium, so before recycling, unscrew it from the bottle and separate it.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 200 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.






















































