ALUMINUM BOTTLES
Aluminium Bottle, White Lotion Pump With Overcap, Glossy Gold, 225 ml
Pack size50 ml100 ml200 ml225 ml
Aluminium bottle with pump and overcap combines unbreakable packaging with a pump that dispenses the contents with a single press. full description
Lowest price in the last 30 days: €3.29
Save €0.03 with this set
Total for 1 pcs: €3.29
Quantities add up across all combinations of this bottle.
Product description
Aluminium bottle with pump and overcap combines unbreakable packaging with a pump that dispenses the contents with a single press. The set is suitable for liquid and semi-liquid products that are used daily and in larger quantities: body lotions, liquid soaps, shampoos, conditioners, massage and body oils, shower gels. The 225 ml volume will last for several weeks of use in the bathroom, at the sink or in a salon.
Aluminium is opaque, so the contents remain protected from light wherever the bottle stands. Compared with glass, it is considerably lighter and survives a fall onto a tiled floor without breaking, which you will appreciate for products used in the shower, on the road or at a market stall. The white and gold pump gives the silver bottle a uniform look.
What the set is suitable for
- Body lotions and light emulsions – the pump dispenses one dose without the contents coming into contact with your hands or with the air in the neck of the bottle.
- Liquid soaps, shower gels and shampoos – unbreakable packaging suits the damp environment of a bathroom, where glass poses a risk.
- Massage and body oils – aluminium blocks the light that accelerates the oxidation of oils, and the pump limits spillage.
- Cleansing and make-up removal products – each press dispenses the same amount, so the dose is easy to repeat.
The pump will not draw up a thick cream, a butter or a scrub with coarser particles. For such products, a jar or container is more suitable.
How the pump works
The pump screws onto a neck with a 24/410 thread, and the dip tube reaches the bottom of the bottle, from where it draws up the contents. One press dispenses approximately 0.2 ml; the exact amount depends on the viscosity of the product. With thin liquids the dose is full, with thicker emulsions it may be lower. After filling, the pump needs several presses before the tube fills.
The overcap protects the pump head during transport and storage so that it is not pressed down in a bag or in a box with other goods. Before first use, the overcap is removed; after filling and closing, it can be put back on.
The pump dip tube is longer than the height of the bottle. Before the first filling, shorten it so that it ends just above the bottom. A tube that is too long will bend and the pump will draw up the contents poorly.
Volume and filling
The nominal volume is the amount the packaging is designed for under normal filling. The brimful volume is the physical volume up to the neck, and you will find it in the parameters. The difference between them forms a reserve for the dip tube and the body of the pump, which take up part of the space once screwed in, and for the expansion of the contents with changes in temperature. The bottle is therefore filled up to the nominal volume, not to the brim. If it is overfilled, the contents are pushed out through the neck when the pump is screwed on and the thread is left soiled.
Let the emulsion or soap cool completely and settle before filling, so that air bubbles can escape from the mixture. Pouring through a funnel with a narrower neck keeps the thread clean, and the pump then seals better.
Good to know
Before the first filling, the bottle and the pump are washed, disinfected with isopropyl alcohol or ethanol and left to dry completely. Moisture inside the packaging would needlessly dilute the product.
The set is declared suitable for contact with cosmetic products. We recommend checking the behaviour of your specific recipe in aluminium packaging on a test batch that stays in this bottle for several weeks. A change in fragrance, colour or the appearance of the inner wall will show whether the packaging suits the given formulation.
The aluminium wall will dent under strong pressure or when struck on an edge, and the dent is permanent. Do not stack full bottles on top of each other, and separate them during transport so that they do not press against each other.
After thorough washing and disinfection, the aluminium bottle can be filled repeatedly. The pump contains both plastic and aluminium parts, so for recycling it is separated from the bottle, and the bottle is handed in as metal packaging. You will find further closures with the same type of neck, as well as ready-made combinations of this bottle with other closures, in the Handymade range. If you make your own combination, we recommend checking the seal with your specific formulation beforehand.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 225 ml
White Lotion Pump With Overcap, 24/410, Glossy Gold, 200 mm
- Country of origin
- European Union
- Diameter
- 27,5 mm
- Thread type
- 24/410
- Height
- 45 mm
- Tube length
- 220 mm
- Dose
- 0,2 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

















































