Aluminium Bottle with White Plastic Cap, 225 ml

The 225 ml aluminium bottle with a white cap is a ready-made set for liquid cosmetic products that are dispensed by pouring. The aluminium body blocks out light, so vegetable oils and oil blends with essential oils stay protected wherever the bottle is kept. The bottle is lightweight and does not break if dropped, which is useful for bathroom products, the massage table or travel. The set is declared suitable for contact with cosmetic products, and the declaration of conformity is available with the product.

What the set includes

• Aluminium bottle, 225 ml – silver body with a 24/410 neck finish, opaque, lightweight and impact-resistant.
• Plastic cap, ribbed, white – screw-on polypropylene closure with an EPE foam liner. The ribbing around the edge makes the cap easier to unscrew, even with wet or oily hands.

The cap screws directly onto the neck of the bottle, and the liner sits against the rim of the neck and seals the contents. The product is dispensed by unscrewing the cap and pouring from the neck, without any additional dispensing element.

What it is suitable for

The 225 ml volume suits products that are dispensed in larger amounts at a time:

• Massage and body oils – protection from light slows the yellowing of oils, and the open neck lets you pour a larger amount into the palm.
• Hair oil treatments, after-bath oils and shower oils – the contents are poured into the water or directly onto the skin.
• Cleansing oils and oil cleansers – the opaque packaging also hides any discolouration of the contents.
• Professional packs for salons – the product is decanted from the bottle into smaller pump bottles.

The 24/410 neck finish is a widely used thread type, so the cap can be replaced with a closure that dispenses in a different way. You can find closures with the same neck type and ready-made combinations in the Handymade range. If you make your own combination, we recommend checking the seal and the dispensing with your specific formulation.

Nominal and total volume

The nominal volume of 225 ml is the amount the bottle is designed for in normal filling. The total brim-full volume, given in the parameters, is the physical capacity of the bottle up to the neck. The difference between them is a reserve for the cap liner and for the expansion of the contents when the temperature changes. Fill to the nominal volume, not to the brim. If the bottle is overfilled, the contents overflow when the cap is screwed on and the liner gets contaminated.

Good to know

Before filling for the first time, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. No water may remain inside the bottle, otherwise droplets and cloudiness will appear in an oil product.

Aluminium conducts heat, so do not pour hot mixtures into the bottle. Let them cool to room temperature first. When cleaning, avoid rough sponges and abrasive products, which scratch the surface. Check the liner in the cap after washing. If it is compressed or deformed, the closure no longer seals and it is better to replace it.

The bottle is intended for repeated use as long as it is not deformed and the inside is clean. At the end of its life, the aluminium belongs in metal recycling, and the cap is unscrewed and sorted separately as plastic.

Frequently asked questions