Before the first filling, we recommend mechanically cleaning the packaging (rinsing with a suitable cleaning solution or distilled water) and then disinfecting it. To disinfect the inner surface of the glass and the contact surfaces of the dropper, it is appropriate to use, for example, isopropyl alcohol or ethanol, e.g. the products IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný. After disinfection, allow the bottle and the dropper to dry thoroughly so that no residual moisture remains in the packaging, which could affect the stability of the product.

Yes, this glass packaging can be reused if hygienic principles are followed. With each product change or refilling, the bottle and dropper must be thoroughly cleaned and disinfected, for example using the products IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný. Make sure the packaging is completely dry before refilling, in order to minimize the risk of microbial contamination and maintain the stability of the new formulation.

If you decide not to use the packaging further, we recommend recycling it according to the material types specified in the product parameters. The glass part of the bottle can, after emptying and basic rinsing, be placed in the appropriate glass collection container. The dropper consists of several components (plastic, rubber, possibly a metal cap), so it is advisable to separate the individual parts where possible and sort them according to local waste collection rules. Always follow the local waste sorting system and the information in the parameter table for the given product on the Handymade.sk website.

The dropper medicine bottle is ideal for concentrated liquid formulations that require precise drop-by-drop dosing. You will use it, for example, for facial and hair serums, oils with a high content of active substances, AHA/BHA solutions, intensive essences, boosters or laboratory test samples. The packaging is suitable for aqueous, hydroalcoholic and oil systems, but we always recommend checking in advance the compatibility of the specific recipe with the dropper and sealing.

To choose a suitable packaging, we recommend using the advanced filter in the packaging material categories. After clicking on the relevant category (for example bottles, medicine bottles or cosmetic packaging), you will find the advanced filter at the top of the page. There you can clearly filter by neck type, size, colour and material, which allows you to quickly narrow down the selection to packaging that meets your technical and design requirements.