GLASS BOTTLES 50 ml
Amber Glass Bottle, White Tamper Evident Safety Cap & Dropper, 50 ml
Pack size5 ml10 ml15 ml30 ml50 ml100 ml
The amber glass medicine bottle with a volume of 50 ml , a plastic dropper insert and a white ribbed safety cap is packaging for liquid preparations that are dispensed drop by drop . full description
Lowest price in the last 30 days: €0.72
Total for 1 pcs: €0.72
Quantities add up across all combinations of this bottle.
Product description
The amber glass medicine bottle with a volume of 50 ml, a plastic dropper insert and a white ribbed safety cap is packaging for liquid preparations that are dispensed drop by drop. Amber glass limits the passage of light, so contents that are sensitive to oxidation and to degradation by light remain unchanged for longer. The dropper insert is pushed straight into the neck, the cap is screwed onto it, and to use it you only need to tilt the medicine bottle.
The set is declared as suitable for contact with cosmetics. It is most often filled with oil serums, blends of vegetable oils with active ingredients, tinctures, alcohol extracts and fragrance compositions. It is suitable wherever an exact amount matters and where the bottle should not stay open longer than necessary.
How the set works
- Glass medicine bottle, 50 ml – amber glass with an 18/410 neck finish. It does not react with oils, alcohol or essential oils, which makes it a sound basis for sensitive and concentrated contents.
- Plastic dropper insert, long – a clear PP dropper insert is pressed into the neck and creates a narrow outlet opening. The longer version reaches deeper into the bottle and the contents are dispensed evenly, one drop at a time.
- White safety cap – a plastic 18/410 screw closure made of PE. The ribbed surface makes it easier to grip, even with greasy fingers.
The dropper insert also slows the flow if the uncapped bottle is turned upside down and limits the access of air to the surface of the contents.
What it is suitable for
Drop-by-drop dispensing makes sense for preparations of which only a few drops are used at a time: facial oil serums, oil blends for the bath, tinctures, glycerine or alcohol extracts, and essential oil compositions in a carrier oil. Dark glass is also used for raw materials that tend to yellow and lose their effect, for example oils with a high share of unsaturated fatty acids or extracts rich in plant pigments.
The dropper insert works best with thin and medium-thick liquids. Thick blends with castor oil, gel serums or preparations with a suspension drip slowly and the outlet opening may become blocked. For water-based toners that are applied over a larger area, packaging with a sprayer is more suitable.
Before filling a larger batch, fill one medicine bottle and leave it standing for several days, including on its side. This lets you check the tightness of the closure, the dripping speed and whether the dropper insert and cap are compatible with your particular formulation, especially with a higher share of essential oils or alcohol.
Filling and volume
The nominal volume is the amount the bottle is designed for under normal filling. The brimful volume is the physical volume up to the neck and you will find it in the parameters. The difference between them provides a reserve for the dropper insert once it is pushed in and for the expansion of the contents when the temperature changes. For this reason, fill only up to the nominal volume, not up to the brim. If the level reached the neck, the dropper insert would push part of the contents out when inserted.
Before the first filling, the medicine bottle and the closure are washed, disinfected with isopropyl alcohol or ethanol and left to dry completely. Residual water in an oil-based preparation reduces its stability and may support the growth of microorganisms.
Good to know
Only the glass medicine bottle on its own has a certificate for direct contact with food. The dropper insert and the cap do not have one, so the set as a whole is regarded as packaging intended for cosmetics.
Do not use the set as a whole for food. For homemade oils or syrups, use the medicine bottle alone with a closure that has a certificate for contact with food.
Glass withstands heat and disinfection with alcohol, but it may crack with a sudden change of temperature. Hot blends should therefore be left to cool before filling. The plastic parts can be reused after washing, but with strongly aromatic contents the plastic retains the scent.
Closures with an 18/410 neck finish are also available separately in the Handymade range, as are other ready-made combinations of medicine bottle and closure. If you put together your own set, we recommend checking the tightness and dispensing with your particular formulation.
Glass belongs in glass recycling and the plastic parts in plastics recycling. Take the set apart before recycling.
Frequently asked questions
Parameters
Glass bottle, vial, 18 mm, 50 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 50
- Brimful capacity
- 58 ml
- Diameter
- 38 mm
- Thread type
- 18/410
- Height
- 91,7 mm
- Product material
- Glass
Plastic dropper for glass vials, 18 mm, long
White Plastic Tamper Evident Safety Cap, Ribbed, 18/410
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.













































































