+421 950 333 113info@handymade.store

Spend over €100 for discounted shipping!

PLASTIC BOTTLES

Amber Plastic Bottle, Black Lotion Pump With Glossy Silver Collar, 300 ml

Pack size100 ml150 ml200 ml300 ml

The amber 300 ml plastic bottle with a black and silver pump makes ready-to-sell packaging for liquid soaps, shampoos, shower gels, body lotions and lighter face or body oils. full description

AvailabilityIn stock · 153 pcs
Product codeO24PH300-OVD24CS
€1.58incl. VAT

Lowest price in the last 30 days: €1.58

Volume pricing
1–169 pcs€1.58Your price
170–1019 pcs€1.51−5 % · 1× plato
1020–5099 pcs€1.34−15 % · 6× plato
from 5100 pcs€1.18−25 % · 30× plato

Total for 1 pcs: €1.58

Quantities add up across all combinations of this bottle.

Product description

The amber 300 ml plastic bottle with a black and silver pump makes ready-to-sell packaging for liquid soaps, shampoos, shower gels, body lotions and lighter face or body oils. Amber plastic reduces light exposure, so the set suits products containing vegetable oils, essential oils or other light-sensitive ingredients. The PET bottle is lightweight and unbreakable, which you will appreciate in the shower, at the sink and when sending it to customers.

The pump dispenses the contents with a single press, without unscrewing anything and without fingers touching the product. For rinse-off products and body care products used in larger quantities, this is more convenient than a cap that has to be opened for every use.


What the set is suitable for

  • Liquid soaps and shower gels – the pump dispenses thin to medium-thick surfactant-based products without any problem.
  • Shampoos and conditioners with lower viscosity – the 300 ml volume corresponds to a standard pack that lasts several weeks of use.
  • Body lotions and light emulsions – the pump handles thinner O/W emulsions. Very thick creams and butters are difficult to dispense through it.
  • Massage and body oils – the amber packaging protects oils from light, and a single press per dose makes even application easier.

Good to know

The nominal volume is the volume the bottle is designed for in normal filling. The brimful capacity given in the parameters is the physical volume up to the neck. The difference between them is a reserve for the pump tube and for expansion of the contents when the temperature changes. The bottle should therefore be filled up to the nominal volume, not to the brim, otherwise the contents will overflow when the pump is screwed on.

One press dispenses approximately 1 ml of product. After filling and screwing on the pump, it needs several empty presses until the tube fills and dispensing begins. The tube reaches the bottom of the bottle, so almost the entire contents can be used up. If the tube bends at the bottom, shorten it with an angled cut.

The declaration of suitability for contact with cosmetic products is available for the pump separately. No such declaration is available for the bottle, so the set as a whole is not declared as suitable for contact with cosmetics. Before selling the finished product, we recommend checking how the packaging behaves with your specific formulation.

PET does not tolerate higher temperatures or aggressive chemicals. Let emulsions and surfactant bases cool to room temperature before filling. For products with a high proportion of essential oils, alcohol or solvents, test beforehand whether the plastic softens or turns cloudy and whether the pump still seals properly.

Before the first filling, rinse the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the pump by pressing it several times with ethanol and let it dry as well, so that no water remains in the tube.

The set can be used repeatedly. However, before each refill, rinse the whole pump thoroughly, as residues of the old product could spoil the new contents. The bottle has a 24/410 neck finish, so other closures with the same neck type from the Handymade range will also fit it. For recycling, the bottle belongs with PET plastics. The pump combines polypropylene and aluminium, so separate it from the bottle.


Frequently asked questions

Does the amber PET bottle with a pump protect the contents from light?
Yes, the amber colour of the plastic reduces the passage of light and slows its effect on the contents. It is therefore suitable for oils, products containing essential oils and cosmetics with light-sensitive active ingredients. It does not provide complete protection, so it is still advisable to store the bottle out of direct sunlight.
How much product should I put in a 300 ml bottle with a pump?
Fill the bottle up to the nominal volume of 300 ml, not to the brim. The remaining space up to the neck is a reserve for the pump tube and for expansion of the contents when the temperature changes. If the bottle is overfilled, part of the product will be pushed out when the pump is screwed on, or it will start to leak through the thread.
Can a thick cream be dispensed through a 24/410 pump?
The pump is designed for liquid to medium-thick products. Thick creams and body butters pass through it with difficulty or not at all. It handles liquid soaps, gels, shampoos, body lotions and oils without any problem. For a thicker emulsion, we recommend testing the dispensing on a small sample before filling the whole batch.
Is the bottle and pump set suitable for cosmetics and food?
The declaration of suitability for contact with cosmetic products is available for the pump only, not for the bottle, so the set as a whole is not declared as such. The set is not approved for contact with food and is not used for food purposes. We recommend verifying its suitability for your specific recipe by testing.
How do I clean the bottle with a pump before reusing it?
Rinse the bottle with warm water and a small amount of cleaning product, disinfect it with ethanol or isopropyl alcohol and let it dry. Press the pump several times in clean water and then in ethanol, and let both the tube and the mechanism dry. Do not use hot water, as PET deforms with heat.

Parameters

Brown plastic bottle, 24/410, 300 ml

Product colour
Brown
Country of origin
European Union
Nominal capacity
300
Brimful capacity
317 ml
Diameter
58 mm
Thread type
24/410
Height
146 mm
Product material
PETPlastic

Plastic pump dispenser, 24/410, black-silver, 180 mm

Product colour
BlackSilver
Country of origin
China
Diameter
27,5 mm
Thread type
24/410
Height
37 mm
Tube length
180 mm
Dose
1 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Brown plastic bottle, 24/410, 300 ml · O24PH300PDF ↓
Plastic pump dispenser, 24/410, black-silver, 180 mm · OVD24CSPDF ↓
PDSProduct Data Sheet
Brown plastic bottle, 24/410, 300 ml · O24PH300PDF ↓
Plastic pump dispenser, 24/410, black-silver, 180 mm · OVD24CSPDF ↓
DrawingTechnical drawing
Brown plastic bottle, 24/410, 300 ml · O24PH300PDF ↓
Plastic pump dispenser, 24/410, black-silver, 180 mm · OVD24CSPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.