PLASTIC BOTTLES
Amber Plastic Bottle, Black Lotion Pump With Glossy Silver Collar, 200 ml
Pack size100 ml150 ml200 ml300 ml
A bottle with a pump for liquid and semi-liquid cosmetic products that are dispensed repeatedly in small doses: liquid soaps, shampoos, lotions or oils. full description
Lowest price in the last 30 days: €1.38
Total for 1 pcs: €1.38
Quantities add up across all combinations of this bottle.
Product description
A bottle with a pump for liquid and semi-liquid cosmetic products that are dispensed repeatedly in small doses: liquid soaps, shampoos, lotions or oils. The amber PET bottle with a volume of 200 ml reduces the amount of light reaching the contents, which is useful for formulations with vegetable oils, extracts or light-sensitive fragrance ingredients. The plastic is lightweight and unbreakable, so the bottle can handle the shower, the bathroom shelf and travel.
The set consists of a bottle and a black and silver pump with the same 24/410 neck finish. Both parts are declared as suitable for contact with cosmetic products. The set is not approved for contact with food, so it is not suitable for homemade oils, syrups or infusions.
What the set is suitable for
- Liquid soaps and shower gels – the pump dispenses a suitable amount without unscrewing, and the bottle can stand by the sink or in the shower.
- Shampoos and liquid conditioners – at normal viscosity they pass through the tube and piston smoothly.
- Body lotions and facial lotions – lighter O/W emulsions are dispensed without sticking, and with thicker creams we recommend testing first.
- Massage and body oils – they have a low viscosity, and the dark packaging protects them from light, which speeds up yellowing and oxidation.
- Cleansing oils and micellar waters – the dose per press is always the same, which makes it easier to apply to a cotton pad.
How to use the pump
One press dispenses a dose of 1 ml. The same dose with every press helps especially with more concentrated products, where the customer does not have to estimate the amount from the bottle. After filling the bottle and fitting the pump, press the head several times without product until the tube and piston fill with the contents. Only then does the pump dispense the full dose.
The pump tube is longer than this bottle requires. Before fitting it, shorten it with a sharp knife or scissors so that its end reaches just above the bottom. An angled cut at the end prevents the tube from sticking to the bottom and interrupting the suction.
Shorten the tube gradually and try fitting the pump into the bottle after each cut. A tube that is too short leaves an unused residue of the contents at the bottom, while a tube that is too long bends and draws less well.
Volume and filling
The nominal volume is the volume the bottle is intended for with normal filling. The total brimful volume is the physical volume up to the neck, and you can find it in the parameters. The difference between them is a reserve for the tube with piston and for the expansion of the contents when the temperature changes, so the bottle is filled to the nominal volume, not to the brim.
Pour in the contents once they have cooled. PET is not intended for hot filling and may deform at higher temperatures. Let emulsions cool down and fill using a funnel or a syringe, so that the neck stays clean and the thread seals properly.
Good to know
Before filling for the first time, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Place the pump on a container with disinfectant solution and pump several times, then repeat the same with clean water and let it drain with the head facing down. Water residues inside would dilute the first doses and could promote the growth of microorganisms in anhydrous products.
The packaging can be reused. When switching to a different type of product, pump thoroughly, as the mechanism retains a small amount of the previous contents. Thicker creams, butters and products with solid particles pass through the pump with difficulty or not at all, so choose a jar or container for them.
The bottle is not intended for aggressive chemicals. For formulations with a high proportion of essential oils, alcohol or solvents, we recommend filling one bottle and observing for several weeks how the packaging behaves with your specific formulation.
The PET bottle is recycled as plastic. The pump is made of polypropylene with an aluminium part, so unscrew it before disposal and sort it separately.
Closures, sprayers and droppers with the same neck finish, as well as other ready-made combinations, can be found in the Handymade range. If you are making your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Brown plastic bottle, 24/410, 200 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 200
- Brimful capacity
- 220 ml
- Diameter
- 51 mm
- Thread type
- 24/410
- Height
- 133 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



































































