+421 950 333 113info@handymade.store

Spend over €100 for discounted shipping!

PLASTIC BOTTLES

Amber Plastic Bottle, Black Lotion Pump With Glossy Silver Collar, 100 ml

Pack size100 ml150 ml200 ml300 ml

The amber PET bottle with a volume of 100 ml and a black and silver pump is ready-made packaging for liquid and medium-thick cosmetic products that are dispensed by pressing: face and body lotions, light creams, serums,… full description

AvailabilityIn stock · 260 pcs
Product codeO24PH100-OVD24CS
€1.11incl. VAT

Lowest price in the last 30 days: €1.11

Volume pricing
1–199 pcs€1.11Your price
200–999 pcs€1.01−9 %
1000–4999 pcs€0.93−16 %
from 5000 pcs€0.84−24 %

Total for 1 pcs: €1.11

Quantities add up across all combinations of this bottle.

Product description

The amber PET bottle with a volume of 100 ml and a black and silver pump is ready-made packaging for liquid and medium-thick cosmetic products that are dispensed by pressing: face and body lotions, light creams, serums, massage and facial oils, cleansing gels or liquid soap in a small pack. Amber plastic filters light and so helps protect contents that are sensitive to it, for example oils and formulations containing essential oils or antioxidants. PET is lightweight and shatter-resistant, so the bottle holds up well in the bathroom, while travelling and as a sample for customers. With one press the pump dispenses approximately 1 ml, so the contents are dispensed without opening the bottle and without fingers touching the product.

The set is declared suitable for contact with cosmetic products.


What it is suitable for

  • Face and body lotions – thinner emulsions pass through the pump with ease and the dose is the same with every press.
  • Serums and light creams – the bottle is not opened during use, you do not touch the contents with your fingers and you dispense them in small doses.
  • Massage and facial oils – the oil is dispensed in small amounts, consumption is easier to control and the bottle does not need to be tilted.
  • Cleansing gels and liquid soaps – at the sink you can dispense with one hand, which you will appreciate in a beauty salon as well as in a workshop.
  • Samples and travel packs – a plastic bottle will not weigh down your bag and there is no risk of it breaking.

Dispensing and working with the set

The pump draws the contents up through a dip tube from the bottom of the bottle and dispenses one dose when the head is pressed. After filling and screwing it on, press it several times to prime it until the tube fills and the pump starts dispensing a full dose. The consistency of the product determines how it will be dispensed. Liquid and medium-thick formulations work without problems, whereas thick creams and butters cannot be pushed through the pump. For very thin contents, such as toners, we recommend testing whether the way of dispensing suits you.

The pump dip tube is longer than the bottle, so before fitting it for the first time, shorten it with a sharp knife or scissors so that it ends just above the bottom. The pump will then draw out the contents almost to the bottom and the tube will not bend in the bottle.

The bottle has a 24/410 neck finish, so it can also be closed with other closures of the same neck type, or you can choose one of the ready-made sets. When combining your own parts, check the seal and the behaviour of the closure with your particular formulation.


Nominal and total volume

The nominal volume is the amount the bottle is designed for in normal filling. The total brimful volume is the physical volume up to the neck and you will find it in the parameters. The difference between them serves as a reserve for the pump dip tube, which pushes part of the contents upwards after screwing on, and for the expansion of the product with changes in temperature. The bottle is filled up to the nominal volume, not to the brim.


Good to know

  • Preparation before first filling – wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse and dry the pump before use.
  • Reuse – once empty, the set can be washed and filled again. Rinse the pump immediately after emptying, as dried emulsion residues are harder to remove from the tube.
  • Composition of the contents and material – PET suits common emulsions, oils and gels. For formulations with a high proportion of essential oils or solvents, check beforehand that neither the bottle nor the pump changes shape or colour or loses its seal.
  • Pump material – the pump combines polypropylene and aluminium. For alcohol-based formulations, check how its parts behave with the contents.
  • Food contact – the set is not declared suitable for food contact; it is intended for cosmetic products.
  • Recycling – the bottle is made of PET and belongs with plastics, the pump is made of PP and aluminium, so separate it from the bottle before disposal.

Let the contents cool to room temperature before filling. The bottle must be protected from heat, as a hot emulsion or oil can deform it.


Frequently asked questions

Does the amber 100 ml plastic bottle protect the contents from light?
Yes, amber PET reduces the amount of light passing through and so limits its effect on the contents. It is therefore suitable for oils, serums with antioxidants or products with essential oils, which lose their properties in light. The packaging cannot guarantee complete protection, so do not leave the product in direct sunlight or in a hot display case.
How much does the pump dispense per press and how thick a product can it handle?
One press dispenses approximately 1 ml of contents; the actual amount depends on the thickness of the product. The pump is intended for liquid and medium-thick formulations such as lotions, serums, oils, gels and liquid soaps. Thick creams and body butters cannot be dispensed with it; a jar or tube is more suitable for them.
How much should I pour into the 100 ml bottle?
Fill up to the nominal volume of 100 ml, not to the brim. The remaining space up to the neck is a reserve for the pump dip tube, which pushes the level upwards after screwing on, and for the expansion of the contents with changes in temperature. An overfilled bottle will overflow when the pump is fitted or will be harder to close.
Can the plastic bottle with pump be washed and reused?
Yes, once empty, both the bottle and the pump can be washed and filled again. Wash the bottle, disinfect it with alcohol and let it dry. Pump warm water through the pump, then alcohol and finally air, so that no water remains in the tube. Always remove residues of the old product thoroughly, otherwise they may contaminate the new filling.
Is the amber PET bottle with pump suitable for oils, water-based and alcohol-based products?
For oils and water-based emulsions, yes; for alcohol-based products, check the behaviour of the material beforehand. PET tolerates common cosmetic oils, gels and emulsions well. With a high proportion of alcohol, essential oils or solvents, check after a few days that the bottle and pump keep their shape, do not change colour and remain sealed.

Parameters

Brown plastic bottle, 24/410, 100 ml

Product colour
Brown
Country of origin
European Union
Nominal capacity
100
Brimful capacity
117 ml
Diameter
44 mm
Thread type
24/410
Height
98 mm
Product material
PETPlastic

Plastic pump dispenser, 24/410, black-silver, 180 mm

Product colour
BlackSilver
Country of origin
China
Diameter
27,5 mm
Thread type
24/410
Height
37 mm
Tube length
180 mm
Dose
1 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Brown plastic bottle, 24/410, 100 ml · O24PH100PDF ↓
Plastic pump dispenser, 24/410, black-silver, 180 mm · OVD24CSPDF ↓
PDSProduct Data Sheet
Brown plastic bottle, 24/410, 100 ml · O24PH100PDF ↓
Plastic pump dispenser, 24/410, black-silver, 180 mm · OVD24CSPDF ↓
DrawingTechnical drawing
Brown plastic bottle, 24/410, 100 ml · O24PH100PDF ↓
Plastic pump dispenser, 24/410, black-silver, 180 mm · OVD24CSPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.