PLASTIC BOTTLES
Amber Plastic Bottle, Black Plastic Disc Top With Golden Aluminum Collar, 150 ml
Pack size100 ml150 ml200 ml300 ml
The amber plastic bottle with a gold disc top cap is a ready-made set for filling liquid and semi-liquid cosmetic products that are dispensed by squeezing the bottle. full description
Lowest price in the last 30 days: €1.41
Total for 1 pcs: €1.41
Quantities add up across all combinations of this bottle.
Product description
The amber plastic bottle with a gold disc top cap is a ready-made set for filling liquid and semi-liquid cosmetic products that are dispensed by squeezing the bottle. The PET bottle with a nominal volume of 150 ml is lightweight and shatter-resistant. The amber colour reduces light exposure and helps protect light-sensitive ingredients, such as vegetable and essential oils or the vitamins in body lotions. The cap opens and closes with one hand, which is useful for products used in the shower or at the sink.
The volume and dispensing method make this set suitable for shower gels, shampoos, conditioners, body lotions and liquid soaps. Both the bottle and the cap are declared suitable for contact with cosmetic products, and the declaration of conformity is available with the product.
How the disc top cap works
The cap has a flat disc. When you press one side, the other side lifts and uncovers the dispensing opening. The contents are dispensed by gently squeezing the bottle. Pressing the disc down on the opposite side closes the opening again, with no need to unscrew anything or look for a small cap. The cap combines aluminium and polypropylene and is gold with a black centre.
A disc top works well for products that flow but are not completely watery. Very thin liquids may leak from the opening on their own or when the bottle is laid on its side. Thick creams are hard to push through the disc, and some of the contents remain on the walls of the bottle.
What the set is suitable for
- Shower gels and liquid soaps – the gel or thicker liquid passes through the opening in the disc evenly, without unexpected squirting.
- Shampoos and conditioners – one-handed use in the shower, and the cap can be closed even with wet fingers.
- Body lotions and light face lotions – lotions of ordinary consistency dispense without problems. For very thick lotions, try dispensing a single sample first.
- Massage and body oils – the colour of the bottle partly protects the oils from light. With thinner oils, check that the disc seals when the bottle is turned upside down.
Volume and filling
The nominal volume is the amount the bottle is intended to hold when filled normally, in this case 150 ml. The brimful volume given in the parameters is the physical volume up to the neck. The difference provides a reserve for the cap and for the expansion of the contents when the temperature changes. It also leaves an air space in the bottle, without which the contents could not be squeezed out.
Fill the bottle to the nominal volume, not to the brim. If it is filled up to the neck, part of the contents is pushed into the thread when you screw the cap on, and the disc leaks the first time you open it.
Good to know
Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the thread or in the disc dilutes the first dose of the product and shortens the shelf life of products without a preservative.
The PET bottle must not be filled with hot contents. Let emulsions and gels cool to room temperature, as heat deforms the material and the bottle may lose its shape or the seal at the neck. Caution is also advisable with products containing a high proportion of essential oils or solvents. With such formulations, test how the plastic behaves on a single bottle before you fill the whole batch.
Before transporting or shipping the finished product, check that the disc is pressed into the closed position. An open disc under pressure in a parcel lets the contents out.
After thorough washing, the bottle can be reused. Other closures with the same thread type from the Handymade range also fit the neck, and ready-made combinations are available in our range. If you make your own combination, check the seal and the dispensing with your specific formulation. The bottle is made of PET and the cap combines polypropylene and aluminium, so the two parts are sorted separately by material for recycling.
Frequently asked questions
Parameters
Brown plastic bottle, 24/410, 150 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 150
- Brimful capacity
- 170 ml
- Diameter
- 49 mm
- Thread type
- 24/410
- Height
- 118 mm
Black Plastic Disc Top With Golden Aluminum Collar, 24/410
- Country of origin
- European Union
- Diameter
- 28 mm
- Thread type
- 24/410
- Height
- 29 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.


































































