Yes, the packaging can be reused if handled correctly and if hygiene principles are observed. Before each new filling, we recommend thoroughly cleaning the bottle and the spray pump and then disinfecting them, for example using IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný. Only after cleaning and disinfection is the packaging ready to be safely refilled with a new formulation.

Before cleaning, we recommend completely emptying the packaging and disassembling it – separating the bottle itself from the spray pump. You can rinse the container with a suitable cleaning solution and clean water, making sure to remove all residues of the original product. The spray pump should be rinsed repeatedly by spraying clean water or cleaning solution through the mechanism in order to remove formulation residues from the channels. We then recommend disinfecting with a suitable alcohol-based preparation and allowing all parts to dry thoroughly at room temperature.

If you decide not to use the packaging any longer, we recommend first completely emptying it and removing any product residues. It is then advisable to disassemble the bottle and spray pump into individual parts according to the materials used, as indicated in the product parameters. Based on this information, you assign the individual parts to the appropriate collection containers intended for separate collection of packaging. In this way, you support efficient recycling of material in line with the recommendations for waste separation in your household or premises.

The spray pump is most suitable for low-viscosity to moderately thin liquids that need to be applied as a fine mist or an even spray. These are mainly toning and hydrating face sprays, body and hair sprays, aromatherapeutic blends for rooms, light cleaning solutions or preparations for refreshing textiles. Thick emulsions, gels or products with a higher content of solid particles may not be suitable for this type of mechanism, so we recommend always carrying out a practical dosing test before filling.

To select suitable packaging, we recommend using the advanced filter, which you will find at the top of the page after clicking on the relevant packaging category. In the advanced filter, you can clearly select parameters such as neck type, required volume, colour and also the packaging material. By combining these criteria, you quickly narrow down the range to the packaging that best matches your formulation, brand design and method of product application.