The bottle can be used repeatedly, provided that basic hygiene principles are observed and the packaging is not visibly damaged. Before each refilling, the container and the closure must be thoroughly cleaned and then disinfected with a suitable alcohol-based product, for example isopropyl alcohol or plant-based ethanol. Disinfection helps to minimise the microbiological risk and prolong the shelf life of the final product.

Before the next use, we recommend first rinsing the bottle with the remaining product, then washing it in warm water with a mild detergent and rinsing thoroughly with clean water. After drying, it is advisable to spray or wipe the inner surface and the closure with disinfecting alcohol (for example IPA 99 % or ethanol 96 %). It is important that no water or residues of cleaning agents remain in the container before filling, as they could affect the stability of the formula.

To choose a suitable bottle or other packaging, you can use the advanced filter located at the top of the page after clicking on the selected packaging category. In the clear filter, you can set the parameters according to your needs – for example the neck type, desired size, colour or material. By combining filters, you quickly narrow down the range to those packs that best match your formulation and intended mode of application.

The bottle is ideal for liquid and lightly viscous products such as toners, facial waters, body lotions, shampoos, shower gels or massage oils. The transparent walls allow clear and coloured formulations to be presented attractively, and the matte silver closure gives the final packaging a professional appearance. For very thick products or specific applications, we recommend considering the use of a suitable dispensing closure or pump from the range of compatible components.

We recommend storing filled bottles at a stable room temperature, away from direct sunlight and sources of heat. It is important to always close the cap carefully to minimise contact of the contents with air and impurities. If you work with products that are sensitive to temperature or light, choose a cooler and darker place and follow the recommendations arising from the formulation or the preservation system used.

If you decide not to use the packaging further, we primarily recommend recycling it according to the material type indicated in the product parameters. Before handing it over for separate collection, it is advisable to empty the bottle and give it a rough rinse so that no significant cosmetic residues remain. Plastic parts normally belong in the container designated for plastics; always follow local rules for waste separation and the information given with the specific product. In this way, you reduce the amount of waste and support the reuse of materials.