Before first use, we recommend thoroughly cleaning and drying the bottle and the dropper. Then disinfect the packaging with a suitable alcohol-based preparation, for example isopropyl alcohol or ethanol intended for cleaning packaging. For this purpose you can use the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured vegetable. Spread the disinfectant solution over the inner surface, or briefly rinse it through, then let it ventilate thoroughly and dry so that no alcohol residues remain in the packaging that could affect your formulation.

Yes, the glass medicine bottle is suitable for repeated use if hygiene principles are observed. After the contents have been used up, we recommend carefully rinsing the packaging, removing any product residues and then cleaning and disinfecting it before the next filling. For disinfection you can use IPA 99 % isopropyl alcohol or Ethanol 96 % denatured vegetable. Also pay attention to the dropper – the rubber part and the glass pipette must be thoroughly cleaned, left to dry and only then used again in order to minimise the risk of microbial contamination.

Always store the bottle filled with product tightly closed, in a dry place and out of direct sunlight. Avoid extreme temperatures and long-term exposure to heat, which can accelerate the degradation of active ingredients in your formulation. For oil-based and natural products it is suitable to keep them in a stable environment without significant temperature fluctuations. When handling the dropper, try not to let the pipette touch the skin or other surfaces so that no impurities are introduced into the contents of the bottle.

If you decide not to use the bottle any longer, we recommend recycling it in accordance with local waste sorting rules and with the information given in the parameter table for the product. The glass body of the bottle is usually placed in the container intended for sorted glass waste after removal of any remaining product. The dropper consists of several parts (glass, plastic, possibly rubber), so it is advisable to separate them as far as possible and follow the recommendations given for the material composition in the product parameters. Before recycling, always empty the packaging and remove any remaining contents so that they do not affect the quality of the recycling.

To select a suitable bottle, medicine bottle or other packaging you can use the extended filter, which is located at the top of the page after clicking on a specific packaging category. In the extended filter you can clearly choose parameters such as neck type, packaging size, colour or material so that you can quickly find packaging that matches your formulation and the intended dosing method. By combining several filters you can easily narrow down the offer to only those options that are the most suitable for your project.