GLASS BOTTLES 30 ml
Blue Glass Bottle, White Smooth Matte Dropper, 30 ml
Pack size30 ml50 ml
The 30 ml blue glass medicine bottle with a dropper is a packaging and closure set for products that are dispensed drop by drop: face and oil serums, essential oil blends in a carrier oil, concentrates of active… full description
Lowest price in the last 30 days: €0.98
Total for 1 pcs: €0.98
Quantities add up across all combinations of this bottle.
Product description
The 30 ml blue glass medicine bottle with a dropper is a packaging and closure set for products that are dispensed drop by drop: face and oil serums, essential oil blends in a carrier oil, concentrates of active ingredients or cuticle oil. Blue glass lets through less light than clear glass, so it suits contents that should stay out of direct sunlight. The straight-walled medicine bottle shape stands stably on a shelf and on a work table.
The white matte dropper collar has a smooth surface without ribbing and forms a visually clean pair with the blue bottle. The dropper and the bottle have the same thread type, so the set is supplied matched and nothing needs to be adjusted. The set is declared suitable for contact with cosmetic products.
What it is good for
- Serums and concentrates – water-based and oil-based serums applied drop by drop onto the palm or directly onto the skin. The dropper lets you measure a small amount without waste.
- Face and hair oils – the dropper does not clog with oil and the oil does not run down the neck.
- Essential oil blends in a carrier oil – a small volume is used up before the fragrance changes, and more concentrated blends are dispensed accurately drop by drop.
- Samples and test batches – a volume of 30 ml is enough to verify a formulation or to make a smaller series of trial packs.
How to use the set
The contents are drawn up by squeezing the silicone bulb, immersing the glass tube in the bottle and releasing the bulb. When dispensing, squeeze the bulb slowly so that individual drops come out. Thicker oils and serums with a thickener are drawn up more slowly and the drop is often larger. For such formulations, test the dispensing before final filling.
As a closure, the dropper seals when stored upright. During transport on its side or with larger temperature fluctuations, the contents may seep through the collar because the pressure in the bulb changes. Check the tightness for shipments with your actual formulation and pack the bottles in an upright position.
Before the first filling, wash the bottle and the dropper, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water in the glass tube or under the collar would get into the contents, which is undesirable with anhydrous oils.
Nominal and total volume
The nominal volume is the amount the packaging is designed for in normal filling. The total brimful volume is the physical volume up to the neck and you will find it in the parameters. The difference between them is the headspace. After the dropper is screwed in, the glass tube pushes part of the contents upwards, and the volume of the filling changes slightly with temperature. Therefore, fill up to the nominal volume, not to the brim. If filled up to the neck, the contents would overflow when the dropper is inserted.
Good to know
Glass withstands cleaning with hot water, but not sudden thermal shock. Let the contents cool to room temperature before filling rather than filling straight after heating the oil phase, and do not pour a hot liquid into a cold bottle.
The silicone bulb and the polypropylene collar come into contact with the contents only when drawing them up. Nevertheless, for formulations with a higher proportion of essential oils or with solvents, check whether the bulb softens or the collar deforms over time. Also watch how the dropper behaves in alcohol-based products, where the concentration may change through evaporation via a leaking collar.
The bottle and the dropper can be reused after washing and disinfection. You will find the cleaning procedure in the questions below.
Closures with the same thread type as stated in the parameters, and other ready-made packaging and closure combinations, can be found in the Handymade range. For your own combination, check the tightness, the dispensing and the behaviour of the packaging with your specific formulation.
The bottle is made of glass and belongs in glass recycling once empty. The dropper consists of several materials, so separate the glass tube from the bulb and the collar and sort them separately if your local system allows it.
Frequently asked questions
Parameters
Glass bottle, vial, blue, 18 mm, 30 ml
White Smooth Matte Glass Dropper, 71 mm
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



















































