Blue Glass Bottle, White Nasal Spray, 30 ml

Glass bottle, blue, nasal spray, 30 ml is a ready-made set consisting of a blue glass vial and a white pump with a nasal nozzle, which turns an aqueous solution into a fine mist in small measured doses. It is intended primarily for homemade saline and hydrolate sprays for moisturising and cleansing the nose, but also works for light tonics or refreshing mists in travel size. Blue glass filters light, the pump releases approximately the same amount with each press, and the contents remain sealed from air and direct hand contact.

Why this set

• Blue glass – chemically stable material that does not react with the contents and limits light exposure. Suitable for sensitive hydrolates or solutions containing essential oils.
• Measured dose – each press releases approximately 0.12 ml, making application precise and spill-free. With a full fill, this corresponds to several hundred doses.
• Nasal nozzle – the narrow shape directs the mist precisely and is comfortable for nasal application; also suitable for small areas of skin.
• Hygienic dispensing – the contents are neither poured out nor scooped with fingers, so no contaminants enter the bottle during use. The transparent cap protects the nozzle between uses.
• Neck 18/410 – standard thread; the pump seals tightly on the vial and screws on without tools.

Suitable for products such as

• isotonic or mildly hypertonic saline solutions made from sea salt or Himalayan salt for home nasal moisturising and cleansing,
• hydrolate sprays (eucalyptus, mint, rosemary, chamomile) diluted with water or saline solution,
• light facial mists and tonics in travel size, where a small dose and light protection are valued,
• water-alcohol refreshers for hands or fabric in small quantities.

The set is not intended for oils, thick serums, or emulsions. The pump is designed for thin aqueous liquids with low viscosity. A thicker fill passes through the tube with difficulty, the mist turns into droplets, and the mechanism may become clogged.

Filling and working with the pump

Nominal volume is the amount for which the bottle is intended under normal filling conditions. Total capacity to the brim is larger — it is the physical volume up to the neck. The difference provides a reserve for the pump tube, air above the liquid level, and expansion of the contents with temperature changes. Fill to the nominal volume, not to the brim. After screwing on the pump, the liquid level should not reach the neck.

A new pump must be primed by pressing after screwing it on. The tube and pump chamber are empty, and the first mist usually appears after several presses. On every subsequent use, it dispenses immediately.

Before filling for the first time, wash the bottle, disinfect it with isopropyl alcohol or ethanol, and allow it to dry completely. Do not disassemble the pump; simply rinse it with clean water by pressing it several times and leave it to dry nozzle-side down. For solutions intended for nasal use, work with boiled or distilled water and clean utensils, prepare the fill in small quantities, and replace it frequently.

Good to know

• The pump contains plastic parts, a glass ball, and a steel spring. Aqueous and saline solutions cause no issues. With a higher proportion of essential oils or solvents, we recommend checking compatibility on a single sample over several weeks.
• Saline solutions leave salt crystals in the nozzle after evaporation. Wipe the nozzle after use and occasionally flush it with clean water, otherwise the spray opening narrows.
• The straight cylindrical surface of the bottle is available for a label. Bottle dimensions can be found in the product specifications.
• Glass does not tolerate sudden temperature changes. Do not pour a hot solution into a cold bottle; let it cool first.
• The bottle is reusable after washing and disinfection. For nasal fills, we recommend replacing the pump with each new fill, or when it stops dispensing evenly.

The pump is matched to the vial by neck type. If you want to use the bottle with a different closure, dropper, or atomiser, choose from the Handymade range by the same neck type and verify the seal and performance with your specific formulation.

Frequently asked questions