PLASTIC BOTTLES
Blue Plastic Bottle, Transparent Plastic Pump, 250 ml
Pack size200 ml250 ml
Ready-to-use packaging for liquid soap, shower gel, shampoo, conditioner or body lotion: a blue PET bottle, 250 ml , with a clear pump that dispenses the contents when you press the pump head. full description
Lowest price in the last 30 days: €0.89
Total for 1 pcs: €1.25
Quantities add up across all combinations of this bottle.
Product description
Ready-to-use packaging for liquid soap, shower gel, shampoo, conditioner or body lotion: a blue PET bottle, 250 ml, with a clear pump that dispenses the contents when you press the pump head. The pump sits on a 24/410 neck finish and delivers approximately the same amount with every press, so the bottle does not need to be unscrewed and neither fingers nor shower water get into the contents. The bottle is lightweight and does not break when dropped on a tiled floor. The set is declared suitable for contact with cosmetic products.
What it is suitable for
- Liquid soap and shower gels – the pump dispenses a small dose, while the rest stays in the bottle, covered and protected from splashing water.
- Shampoos and conditioners – thin to medium-thick formulations flow smoothly through the dip tube and the pump mechanism.
- Body and face lotions – thinner emulsions are dispensed cleanly, without hands coming into contact with the contents.
- Massage and body oils – the pump handles low-viscosity oils, and one dose is enough for a smaller area of the body.
How the set works
One press of the pump delivers approximately 1.4 ml of the contents, which corresponds to a usual dose of liquid soap or gel for one wash. The dip tube of the pump is longer than the bottle when delivered and is trimmed before first use so that it reaches just above the bottom. After filling and screwing on the pump, press it several times until the dip tube and the pump mechanism fill and the contents start to come out.
Cut the dip tube at an angle, not straight across. An angled cut does not stick to the bottom of the bottle, and the pump draws up the contents down to the last millilitres.
The nominal volume is the amount the bottle is intended for in normal filling. The brimful volume is the physical volume up to the neck. The difference between them is a reserve for the dip tube and the pump body and for the expansion of the contents when the temperature changes. For this reason, fill the bottle up to the nominal volume, otherwise part of the contents is pushed out when the pump is screwed on.
The bottle has a 24/410 neck finish, so you can combine it with other closures with the same neck type from the Handymade range. If you make your own combination, check the tightness and dispensing with your specific formulation.
Good to know
- Food contact – only the bottle on its own has a certificate for direct food contact. The set with the pump is intended for cosmetics as a whole.
- PET and heat – fill the bottle with products that have cooled down. A hot emulsion or hot gel may deform the plastic. Do not leave the filled packaging in direct sunlight.
- Aggressive substances – do not expose the packaging to aggressive chemicals; it is not intended for solvents or strongly acidic or alkaline preparations. For alcohol-based toners or products with a high proportion of essential oils, test on one piece first.
- Reuse – both the bottle and the pump can be refilled after cleaning and disinfection. When you change the contents, rinse the pump so that no residues of the previous product remain in the dip tube and the pump mechanism.
- Recycling – the bottle is made of PET and the pump of PP. Before disposal, unscrew the pump and sort the two parts separately.
Products with scrub particles, pieces of herbs or a coarser texture do not belong in the pump. They clog the pump mechanism and the seal may be damaged.
Frequently asked questions
Parameters
Plastic bottle, blue, 24/410, without cap, 250 ml
- Product colour
- Blue
- Country of origin
- European Union
- Nominal capacity
- 250
- Diameter
- 50 mm
- Thread type
- GL24
- Height
- 164 mm
Transparent Plastic Pump, 24/410, FBOG 200 mm
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





























































