+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

PLASTIC BOTTLES

Blue Plastic Bottle, Transparent Plastic Pump, 250 ml

Pack size200 ml250 ml

Ready-to-use packaging for liquid soap, shower gel, shampoo, conditioner or body lotion: a blue PET bottle, 250 ml , with a clear pump that dispenses the contents when you press the pump head. full description

AvailabilityPre-order
Product codeO24PM250-OVD24PP
€1.25incl. VAT

Lowest price in the last 30 days: €0.89

Pre-orderThis variant is currently out of stock — your order will be a pre-order and delivery may take longer.
Volume pricing
1–179 pcs€1.25Your price
180–1079 pcs€1.20−4 % · 1× plato
1080–5039 pcs€1.17−7 % · 6× plato
from 5040 pcs€1.11−11 % · 28× plato

Total for 1 pcs: €1.25

Quantities add up across all combinations of this bottle.

Product description

Ready-to-use packaging for liquid soap, shower gel, shampoo, conditioner or body lotion: a blue PET bottle, 250 ml, with a clear pump that dispenses the contents when you press the pump head. The pump sits on a 24/410 neck finish and delivers approximately the same amount with every press, so the bottle does not need to be unscrewed and neither fingers nor shower water get into the contents. The bottle is lightweight and does not break when dropped on a tiled floor. The set is declared suitable for contact with cosmetic products.


What it is suitable for

  • Liquid soap and shower gels – the pump dispenses a small dose, while the rest stays in the bottle, covered and protected from splashing water.
  • Shampoos and conditioners – thin to medium-thick formulations flow smoothly through the dip tube and the pump mechanism.
  • Body and face lotions – thinner emulsions are dispensed cleanly, without hands coming into contact with the contents.
  • Massage and body oils – the pump handles low-viscosity oils, and one dose is enough for a smaller area of the body.

How the set works

One press of the pump delivers approximately 1.4 ml of the contents, which corresponds to a usual dose of liquid soap or gel for one wash. The dip tube of the pump is longer than the bottle when delivered and is trimmed before first use so that it reaches just above the bottom. After filling and screwing on the pump, press it several times until the dip tube and the pump mechanism fill and the contents start to come out.

Cut the dip tube at an angle, not straight across. An angled cut does not stick to the bottom of the bottle, and the pump draws up the contents down to the last millilitres.

The nominal volume is the amount the bottle is intended for in normal filling. The brimful volume is the physical volume up to the neck. The difference between them is a reserve for the dip tube and the pump body and for the expansion of the contents when the temperature changes. For this reason, fill the bottle up to the nominal volume, otherwise part of the contents is pushed out when the pump is screwed on.

The bottle has a 24/410 neck finish, so you can combine it with other closures with the same neck type from the Handymade range. If you make your own combination, check the tightness and dispensing with your specific formulation.


Good to know

  • Food contact – only the bottle on its own has a certificate for direct food contact. The set with the pump is intended for cosmetics as a whole.
  • PET and heat – fill the bottle with products that have cooled down. A hot emulsion or hot gel may deform the plastic. Do not leave the filled packaging in direct sunlight.
  • Aggressive substances – do not expose the packaging to aggressive chemicals; it is not intended for solvents or strongly acidic or alkaline preparations. For alcohol-based toners or products with a high proportion of essential oils, test on one piece first.
  • Reuse – both the bottle and the pump can be refilled after cleaning and disinfection. When you change the contents, rinse the pump so that no residues of the previous product remain in the dip tube and the pump mechanism.
  • Recycling – the bottle is made of PET and the pump of PP. Before disposal, unscrew the pump and sort the two parts separately.

Products with scrub particles, pieces of herbs or a coarser texture do not belong in the pump. They clog the pump mechanism and the seal may be damaged.


Frequently asked questions

Is the blue plastic bottle and pump set suitable for food?
No, the set as a whole is not approved for food contact. Only the blue PET bottle on its own has a certificate for direct food contact; the pump does not have one. The bottle and pump set is intended for cosmetic products such as liquid soaps, shampoos, shower gels or body lotions. For food use, choose a bottle with a closure that has a food-contact certificate.
Can the plastic pump also handle a thick cream or balm?
No, the pump is designed for liquid and thin creamy products. Liquid soap, shampoo, conditioner or body lotion is drawn up without problems. Thick creams, masks or balms do not pass through the dip tube, or the pump mechanism jams after a while. If you are not sure, fill one bottle and test the dispensing before filling the whole batch.
Can a closure other than the pump be fitted on the blue 250 ml PET bottle?
Yes, the bottle has a 24/410 neck finish and every closure with the same neck type from the Handymade range fits it. Ready-made sets are verified as a whole; if you make your own combination, check the tightness and dispensing on one piece with your specific recipe. When you change the closure, only the certificate of the part that has one remains valid.
Can the bottle with a pump be washed and used repeatedly?
Yes, both the bottle and the pump are intended for repeated filling. Wash the bottle with warm water and a cleaning product, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the pump and press it several times with clean water to flush out the residues of the contents, then let it drain. The PET bottle does not withstand boiling or other high temperatures.
How much product can you actually fill into a 250 ml bottle with a pump?
The bottle is filled up to the nominal volume of 250 ml, not up to the brim. The space above this level is a reserve for the dip tube and the pump body and for the expansion of the contents during temperature fluctuations. An overfilled bottle pushes part of the contents out when the pump is screwed on, which soils the thread and compromises the seal.

Parameters

Plastic bottle, blue, 24/410, without cap, 250 ml

Product colour
Blue
Country of origin
European Union
Nominal capacity
250
Diameter
50 mm
Thread type
GL24
Height
164 mm
Product material
PETPlastic

Transparent Plastic Pump, 24/410, FBOG 200 mm

Product colour
Clear
Country of origin
China
Diameter
53 mm
Thread type
24/410
Height
45 mm
Product material
PPPlastic
Tube length
200 mm
Dose
1,4 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, blue, 24/410, without cap, 250 ml · O24PM250PDF ↓
Transparent Plastic Pump, 24/410, FBOG 200 mm · OVD24PPPDF ↓
PDSProduct Data Sheet
Plastic bottle, blue, 24/410, without cap, 250 ml · O24PM250PDF ↓
Transparent Plastic Pump, 24/410, FBOG 200 mm · OVD24PPPDF ↓
DrawingTechnical drawing
Plastic bottle, blue, 24/410, without cap, 250 ml · O24PM250PDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.