Yes, the packaging can be used repeatedly if hygiene principles are observed. Before each new filling, we recommend thoroughly cleaning the bottle and the spray pump and then disinfecting them with a suitable alcohol-based preparation (for example using the products IPA 99 % isopropyl alkohol or Ethanol 96 % denaturovaný rastlinný). After complete drying, you can fill the container again. At the same time, it is important to monitor whether repeated use is not causing visible wear of the plastic or of the spray mechanism.

After the contents have been used up, it is advisable to rinse the bottle with lukewarm water and a mild detergent, then rinse thoroughly with clean water and allow it to dry. You can flush the spray pump by pouring a small amount of clean water into the empty bottle and actuating the spray pump several times so that the water reaches the entire mechanism. Before refilling, we recommend disinfecting the bottle and the spray pump with an alcohol-based preparation and allowing any residual alcohol to completely evaporate.

If you decide not to reuse the packaging, we recommend first emptying it as much as possible, wiping off any product residue with a paper towel and, depending on the type of original filling, handling the waste in accordance with local regulations. The empty bottle itself and the plastic spray pump can, after separating the individual parts, be placed in sorted waste collection according to the material designation given in the product parameters on Handymade.sk. The recycling symbol and the recommended method of sorting follow this material designation. In case of doubt, always follow the instructions of your local waste-sorting system.

Yes, the bottle can, after thorough cleaning and disinfection, also be used for another type of preparation, but we recommend following the principle that for products with a markedly different character (for example changing from a cosmetic product to a cleaning agent) it is advisable to have separate containers. Residues of the fragrance or colour of the original product could affect the properties of the new filling. Before changing the intended use, always carefully clean, flush and disinfect the bottle and the spray pump to prevent unwanted reactions or contamination.

To choose a suitable bottle, vial or jar, we recommend using the extended filter in the packaging material categories. After clicking on the relevant category, a panel with the option of detailed filtering will appear at the top of the page. You can choose a specific neck type, the required size, colour and packaging material, or combine several parameters at once. In this way, you will quickly find the packaging that best corresponds to your formulation and to your visual idea of the final product.