The suitability of the packaging for preparations containing alcohol or essential oils depends on the specific concentration and composition of the formulation. Before final filling, we always recommend carrying out your own compatibility test – fill a smaller amount of the product, observe the behavior of the plastic, the sealing of the spray dispenser and the functionality of the mechanism over time. For long-term storage, it is important to check the packaging regularly and to follow the recommended storage conditions of the manufacturer of the filled mixture.

The packaging can be reused if hygiene principles are observed. Before each new filling, the bottle and the spray dispenser must be thoroughly cleaned and disinfected. For disinfection, we recommend using a suitable alcohol-based preparation, for example isopropyl alcohol available on the site as IPA 99 %, or plant-based ethanol Etanol 96 % denaturovaný rastlinný. After rinsing and disinfection, allow all parts to dry completely and only then refill the packaging to minimize the risk of microbial contamination and product deterioration.

If you decide not to reuse the packaging, we recommend responsible recycling according to the type of material indicated in the parameter table for the product on the Handymade website. Before placing it in sorted waste, it is advisable to empty the bottle, possibly rinse out any product residues, and separate the plastic components (bottle body and spray mechanism), if the design allows this. Then dispose of the individual parts in the appropriate containers in accordance with local rules for the collection and recycling of packaging.

When storing and using the packaging, it is important to avoid extreme conditions such as high temperatures, direct sunlight and contact with aggressive chemicals that are not intended for use with this type of plastic. Store the packaging in a dry, clean place, away from sources of heat and open flames. When transporting, we recommend checking that the spray dispenser is firmly closed and that there is no leakage of the contents around the thread or through the nozzle, especially with low-viscosity liquids with a higher alcohol content.

The simplest way to select suitable packaging is to use the advanced filter in the relevant packaging category. After clicking on the category (for example bottles, medicine bottles or cosmetic packaging), you will find the advanced filter at the top of the page. There you can filter products in detail according to neck type, size, color and material, as well as other parameters if needed. By combining these filters, you can quickly narrow down the selection to only those packages that best match the nature of your product and the desired dosing method.