GLASS BOTTLES 30 ml
Clear Frosted Glass Bottle, Matte White Dropper, 30 ml
Pack size15 ml30 ml
The glass bottle with dropper, 30 ml , is packaging for liquid cosmetic preparations that are dispensed drop by drop: facial serums, face and beard oils, blends of essential oils in a carrier oil, or tinctures. full description
Lowest price in the last 30 days: €0.95
Save €0.01 with this set
Total for 1 pcs: €0.95
Quantities add up across all combinations of this bottle.
Product description
The glass bottle with dropper, 30 ml, is packaging for liquid cosmetic preparations that are dispensed drop by drop: facial serums, face and beard oils, blends of essential oils in a carrier oil, or tinctures. Frosted glass diffuses light and softly veils the contents, yet the level stays visible, so you can see how much product is left in the bottle. The white matte dropper forms a complete set with the bottle, so no additional closure needs to be bought.
The bottle and the dropper are each declared as suitable for contact with cosmetic products, and you will find the declaration of conformity with the product. The set is intended for cosmetics. It is not approved for contact with food, so it is not suitable for homemade oils or syrups.
What the set is suitable for
- Facial serums – liquid water-based and oil-based serums can be applied with the dropper directly onto your fingers or skin, without pouring and without the whole contents coming into contact with your hand.
- Face and beard oils – a few drops per use is a common dose, and the dropper measures it more precisely than the neck of a bottle.
- Blends of essential oils in a carrier oil – diluted aromatherapy and massage blends that are added drop by drop to a bath, to a diffuser or onto the skin.
- Tinctures and concentrates – alcohol-based or glycerine-based extracts that are added to a recipe in small amounts.
- Samples and test batches – a volume of 30 ml is enough to test a recipe or to make a gift version of a product without wasting raw material.
Filling and dispensing
The bottle has a nominal capacity of 30 ml. This is the amount the packaging is designed for under normal filling. The brimful capacity stated in the parameters is slightly larger. The headroom in the bottle is needed for the dropper tube, for air when screwing on the dropper, and for the expansion of the contents with changes in temperature. It should therefore be filled up to the nominal volume, not up to the neck. If the bottle is overfilled, part of the contents is pushed out through the thread when the dropper is screwed on.
The dropper is simple to use. Squeeze the bulb, immerse the tube in the contents and release to draw in the liquid. The length of the dropper is matched to the height of the bottle, so even the remainder of the product at the bottom can be drawn up. It works best with liquid to slightly viscous preparations. Thick gel serums or oil blends with a higher proportion of solid ingredients draw up slowly and drip unevenly through the narrow tube. For such textures it is worth considering a pump or a jar.
Fill with a measuring cup or through a funnel up to the nominal volume, not up to the neck. After screwing on the dropper, turn the bottle upside down for a moment and check that the thread seals properly.
Good to know
Before the first filling, we recommend washing the bottle and the dropper, disinfecting them with isopropyl alcohol or ethanol and letting them dry completely. Residual water in the tube or in the thread would get into an anhydrous product and, with oils, can cause cloudiness or spoilage.
The dropper combines glass, silicone and plastic (PP). The glass tube is resistant to most cosmetic raw materials, and it is rather the silicone bulb that needs attention. With concentrated essential oils, alcohol-based solutions or preparations with a higher proportion of solvents, we recommend checking how the bulb behaves during longer storage and whether it loses its elasticity. Fragrances can soak into silicone, so it is better to always use the same dropper for the same type of product.
The dropper is not an airtight closure. With each use, air gets into the bottle and the dropper comes into contact with the product. For oils prone to oxidation, it is worth filling smaller batches and using up the contents within a reasonable time. The neck of the bottle corresponds to the thread type stated in the parameters, so it can also be closed with other closures with the same neck from the Handymade range. If you combine parts yourself, we recommend checking the seal and the behaviour of the closure with your specific formulation.
Do not pour hot contents into the bottle. Glass does not tolerate sudden changes in temperature well, and the dropper could become deformed if screwed onto a warm product. Let blends cool to room temperature before filling.
The bottle withstands repeated use, and after washing and disinfection you can fill it again. After use, rinse the dropper with warm water and detergent, pump clean water through the tube several times and let it dry. Before a new filling, disinfect it in the same way as the bottle. For recycling, the glass bottle goes in the glass recycling. The dropper is made of several materials, so before throwing it away it is worth separating the bulb from the glass tube and the plastic ring and sorting each part by material.
Frequently asked questions
Parameters
Clear frosted glass bottle, 18 mm, 30 ml
White Matte Glass Dropper, 71 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



















































