PLASTIC BOTTLES
Clear plastic bottle, 24/410, 100 ml, tall
A clear PET bottle with a mechanical fine mist sprayer for 100 ml of liquids applied as a mist. It suits facial toners, hydrosols, hair mists, water-alcohol air fresheners and alcohol-based hand sprays. full description
Lowest price in the last 30 days: €0.97
Total for 1 pcs: €1.15
Quantities add up across all combinations of this bottle.
Product description
A clear PET bottle with a mechanical fine mist sprayer for 100 ml of liquids applied as a mist. It suits facial toners, hydrosols, hair mists, water-alcohol air fresheners and alcohol-based hand sprays. The clear plastic shows the colour of the contents and how much liquid is left. The bottle is lightweight, does not break like glass, and its tall, slim shape takes up little space, even in a handbag.
The 24/410 sprayer has a white body with a glossy silver collar and releases approximately 0.12 ml per press. The length of the dip tube is matched to the height of this bottle, so the contents can be sprayed almost to the bottom.
What the set is suitable for
- Toners and hydrosols – thin water-based solutions are sprayed as an even mist and applied directly to the skin without a cotton pad.
- Hair mists and sprays – light water-based or water-alcohol formulations for refreshing hair or making it easier to detangle.
- Air fresheners and room fragrances – fragrance dissolved in alcohol or in water with a solubiliser, where fine dispersion matters.
- Alcohol-based hand sprays – the sprayer dispenses a small amount that is quickly rubbed in.
- Travel and sample sizes – the 100 ml volume matches the usual limit for liquids in hand luggage.
Filling and volume
The nominal volume is the amount the bottle is designed for in normal filling. The brimful volume given in the parameters is the physical volume up to the neck. The difference between them leaves room for the sprayer’s dip tube and for the contents to expand when the temperature changes. Fill the bottle to the nominal volume. If it were filled to the brim, some of the liquid would be pushed out through the thread when the sprayer is screwed on.
The sprayer works mechanically, without compressed gas. When you use it for the first time, press it several times until the tube and piston fill and the mist starts to come out.
Handling the packaging
Before the first filling, we recommend rinsing the bottle, disinfecting it with isopropyl alcohol or ethanol and letting it dry completely. To rinse the sprayer, fit it on a bottle containing the disinfectant solution and spray it several times, then spray clean water through it in the same way.
Before filling a whole batch, test the finished formulation in one set. Leave it for a few days lying on its side and also upside down, and check the tightness of the thread, the quality of the mist and whether the nozzle gets sticky.
The mechanical sprayer is designed for liquids with a viscosity close to water. Thicker solutions, gels and oils spray poorly, come out in drops or a stream, and the nozzle becomes blocked over time. For oil mists and thicker products, other closures with the same 24/410 neck are suitable, which you can find in the Handymade range together with ready-made packaging + closure combinations. If you make your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.
Good to know
Clear PET offers no protection from light. Products containing light-sensitive ingredients, for example vitamin C, retinoids or a higher proportion of essential oils, are better filled into dark glass, or the set should be stored out of direct sunlight.
Do not expose the bottle to aggressive chemicals. PET tolerates common water-based solutions and water-alcohol sprays with a low fragrance content; with a higher content of essential oils or solvents, we recommend testing one unit first.
A declaration of suitability for contact with cosmetics has been issued for the bottle and you can find it with the product. Both components of the set have an EU declaration of conformity under the packaging regulation. The set is not intended for contact with food.
After cleaning, the set can be reused as long as the thread seals and the sprayer dispenses evenly. The bottle is made of PET and belongs with plastics. The sprayer combines plastic with aluminium, so unscrew it from the bottle before disposal.
Frequently asked questions
Parameters
High Clear Plastic Bottle 24/410, 100 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 100
- Brimful capacity
- 115 ml
- Diameter
- 38,2 mm
- Thread type
- 24/410
- Height
- 123,5 mm
Plastic fine mist sprayer, 24/410, white, glossy silver collar, 12 cm
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





















































