The bottle can be used repeatedly provided that basic hygiene principles are observed and the packaging is not visibly damaged. Before each new filling, the container and the closure must be thoroughly cleaned and then disinfected with a suitable alcohol‑based preparation, for example with isopropyl alcohol or plant‑based ethanol. Disinfection helps minimize the microbiological risk and extend the shelf life of the final product.

Before the next use, we recommend first rinsing the bottle with any remaining product, then washing it in warm water with a mild detergent and rinsing thoroughly with clean water. After drying, it is advisable to spray or wipe the inner surface and the closure with disinfecting alcohol (for example IPA 99% or ethanol 96%). It is important that no water or residues of cleaning agents remain in the container before filling, as these could affect the stability of the formula.

To select a suitable bottle or other packaging, you can use the extended filter located at the top of the page after clicking on the chosen packaging category. In the clear filter, you can set the parameters according to your needs – for example the neck type, required size, colour or material. By combining filters, you can quickly narrow down the offer to packaging that best matches your formulation and method of application.

The bottle is ideal for liquid and slightly viscous products such as toners, facial waters, body lotions, shampoos, shower gels or massage oils. The transparent walls enable good presentation of clear and coloured formulations, and the matte silver closure gives the final packaging a professional appearance. For very thick products or specific applications, we recommend considering the use of a suitable dispensing closure or pump from the range of compatible components.

We recommend storing filled bottles at a stable room temperature, away from direct sunlight and sources of heat. It is important to always close the cap carefully to minimize the contact of the contents with air and impurities. If you are working with preparations sensitive to temperature or light, choose a cooler and darker place and follow the recommendations resulting from the formula or the preservation system used.

If you decide not to use the packaging any further, we recommend primarily recycling it according to the material type specified in the product parameters. Before handing it over for sorted collection, it is advisable to empty the bottle and give it a rough rinse so that no significant residues of cosmetics remain. Plastic components normally belong in the container intended for plastics, but always follow local rules for waste sorting and the information provided for the specific product. In this way you reduce the amount of waste and support the reuse of materials.