SURFACTANTS
Cocamidopropyl Betaine, 1 l
Pack size100 ml500 ml1 l5 l20 l
Cocamidopropyl Betaine (CAPB) is an amphoteric surfactant derived from the fatty acids of coconut and palm kernel oil. full description
Lowest price in the last 30 days: €7.99
Product description
Cocamidopropyl Betaine (CAPB) is an amphoteric surfactant derived from the fatty acids of coconut and palm kernel oil. In shampoos, shower gels and liquid soaps it complements the primary surfactant, and together with anionic surfactants it forms a blend that, according to the manufacturer, improves the dermatological tolerance of the finished product. It also boosts foam. This is why it regularly appears in formulations for sensitive skin, in baby cosmetics and in intimate hygiene products.
The raw material is intended for rinse-off products and comes from European production.
What it does in a formulation
- Cleansing – removes dirt and sebum from skin and hair; in a blend with other surfactants it forms the basis of the cleansing action of shampoos, shower gels and liquid soaps.
- Foam support – with anionic surfactants, for example Sodium Laureth Sulfate or sarcosinates, it gives richer and more stable foam.
- Better tolerance of the blend – according to the manufacturer, combining it with anionic surfactants creates a synergy that leads to a dermatological improvement of the finished product.
- Wide compatibility – it combines with anionic, non-ionic, amphoteric and cationic surfactants and works in both acidic and neutral environments.
- Low impurity content – the manufacturer states a maximum of 0.3% amidoamine and a maximum of 5 ppm monochloroacetic acid. Allergic reactions to this type of surfactant are attributed to residual impurities, not to the betaine itself.
Use in a formulation
The raw material is liquid, pumpable and fully miscible with water, so it is added to the water phase or to the cooling phase. The recommended processing temperature is below 40 °C; there is no need to heat it. It does not dissolve in oil or paraffin and dissolves only poorly in ethanol, so it is not suitable for anhydrous oil systems.
The recommended usage rate is 1–20% of the raw material. In formulations it most often falls around 9%, in shampoos and shower gels from 2–3% up to approximately 14%, and in cleaning products 1–10%. Higher rates appear in concentrated shampoos and solid products. The undiluted raw material has a pH of 4.5–5.5, and the recommended pH range of the finished formulation is 4.5–7. Citric acid is commonly used to adjust the pH.
The raw material contains 44–46% active substance, 54–56% water and 5.8–7.3% sodium chloride from production. When calculating the active surfactant in a formulation, keep in mind that the dose of the raw material is not the dose of pure betaine; 10% of the raw material corresponds to approximately 4.5% of active surfactant.
When making a shower gel or shampoo, the betaine is first mixed with the other surfactants, for example glucosides, and only then is the essential oil or fragrance composition stirred into this blend. Slow stirring without creating a vortex limits foaming, and the mixture gradually clears. For solid surfactants such as powders or isethionates, a mixture of betaine with glycerine or hydrosol helps to melt them or to create a paste that is easier to work with.
The concentrated raw material is classified under CLP with the pictogram GHS05 (corrosive). Use gloves and eye protection when measuring and mixing.
Suitable for products such as
- Shampoos – both liquid and solid, including baby shampoos and shampoos for sensitive scalps.
- Shower and bath products – gels, bubble baths, shower creams.
- Intimate hygiene products – the raw material also works in the acidic environment that is commonly expected for this type of product.
- Cleansing gels and facial foams – as a supplementary surfactant alongside glucosides.
- Liquid hand soaps – improves the foam and the tolerance of the surfactant blend.
Good to know
On the market, Cocamidopropyl Betaine is sometimes sold under the name “Coco Betaine”, which is, however, a different substance with its own INCI name. When replacing a raw material or comparing formulations, go by the INCI name. The raw material contains no preservative or antioxidant, so the finished water-based product needs its own preservative system. It is readily biodegradable and contains no sulfates, PEG, silicones or EDTA.
Frequently asked questions
Parameters
- INCI
- Cocamidopropyl Betaine
- CAS No.
- 97862-59-4
- EC number
- 931-296-8
- Product colour
- Yellow
- Country of origin
- European Union
- Grade
- Cosmetic grade
- Processing method
- Chemical synthesis
- Odour
- Characteristic
- Appearance
- Liquid
- Active surfactant matter
- 44,844.8 %
- Formulation phase
- Water phaseCool-down phase
- Function in formulation
- Surfactant
- HLB value
- 12-13
- Ionic character
- Amphoteric
- Recommended processing temperature
- < 40 °C
- Recommended usage rate
- 1 – 20 %
- Recommended formulation pH range
- 4,5 – 7
- Solubility
- Water-miscibleWater-soluble
- Application type
- Rinse-off
- Effects
- Cleansing
- Biodegradability
- Readily biodegradable
- Natural Index (NI ISO 16128)
- 0,55
- Natural Origin Index (NOI ISO 16128)
- 0,89
- Volume
- 1000 ml
Product documentation
- TDSTechnical Data Sheet
- PDF ↓
- SDSSafety Data Sheet
Learn how to work with it
From our blogVariant: Cocamidopropyl Betaine, 500 ml
I couldn't find "Babassu Foam" anymore (which makes the foam for the shampoo), so I asked ChatGPT and it found me the ideal replacement: "Cocamidopropyl Betaine"


Translated automatically
Amazing prices and quality — I have to admit that I have studied all the ingredients you provide more than 3 times, always comparing the prices with other providers and you are the winner most of the time. Amazing quality, sortiment and communication. The girls that answer to e mails are always cheerful and helpful, super smart! Love you guys, you make my days happier and formulating easier.
nothing to complain about, quite the opposite! :)
Translated automatically



























