Before filling, we recommend thoroughly cleaning the bottle and then disinfecting it in order to minimise the risk of microbial contamination of the final product. Alcohol-based preparations such as isopropyl alcohol or ethanol are suitable for disinfecting the packaging. In the offer you will find, for example, the products IPA 99 % isopropyl alkohol 1 l and Etanol 96 % denaturovaný rastlinný 1 l. After disinfection, allow the packaging to dry completely and only then proceed to filling.

The glass packaging can be used repeatedly if hygiene principles are followed. Before each new filling, the bottle and the dropper must be mechanically cleaned as thoroughly as possible and then disinfected with a suitable alcohol solution, for example using the preparations IPA 99 % isopropyl alkohol 1 l or Etanol 96 % denaturovaný rastlinný 1 l. In this way you will reduce the risk of contamination of your product and extend the usability of the packaging itself.

If you decide not to reuse the packaging, it is advisable to place it in sorted waste according to the material. The glass bottle belongs in the container designated for glass, and before disposal it is advisable to remove any product residues. The plastic and composite parts of the closure and the top cover must be sorted according to the instructions given in the parameter table on the product and according to local waste collection rules. In this way you will support proper recycling of packaging materials.

This glass bottle is particularly suitable for liquid and drop-form products where precise and controlled dosing is important. In practice, it is often used for facial and oil serums, concentrated active blends, lighter oils and aromatherapeutic compositions. We always recommend carrying out your own compatibility test to verify the behaviour of the packaging in contact with the specific formula, especially where there is a high proportion of essential oils or active substances.

When selecting suitable packaging, we recommend using the advanced filter which you can find at the top of the page after clicking on the relevant packaging material category. With the help of the filter you can clearly narrow down the range according to parameters such as type and neck diameter, size and volume of the packaging, colour of the material or the material itself (for example glass or various types of plastics). Thanks to this you will quickly find a bottle, jar or pot that will meet the technological and design requirements of your product.