The bottle with sprayer is ideal mainly for watery and low-viscosity solutions that can be evenly misted. With thicker emulsions or oil blends, spraying performance may deteriorate or the nozzle may clog. We recommend first preparing a small test batch and checking the behaviour of the sprayer during prolonged use. If you are planning thicker products, consider choosing another type of dispenser or packaging from the relevant category of pump or dropper bottles.

The packaging can be reused if correct hygiene practices are followed; however, we recommend keeping it for the same type of product for as long as possible to minimise the risk of unwanted reactions or transfer of odours. Before each new filling, the bottle and sprayer must be thoroughly cleaned and disinfected, for example using isopropyl alcohol or ethanol from our range (IPA 99% isopropyl alcohol, ethanol 96% denatured plant-based). This reduces the risk of microbial contamination and extends the safe usability of the repeatedly refilled packaging.

Before reusing the packaging, it is advisable to first completely empty any remaining contents and rinse the bottle with a suitable cleaning solution or distilled water. We then recommend disinfecting with an alcohol-based product, for example IPA 99% isopropyl alcohol or ethanol 96% denatured plant-based, and it is important to allow the packaging to dry thoroughly. For the sprayer, it is advisable to pump the disinfectant solution through the mechanism so that the internal part of the nozzle and the tube are also cleaned. Packaging prepared in this way is then suitable for further safe filling.

If you decide not to reuse the packaging, we recommend placing it in sorted waste according to the material indicated in the product parameters. The bottle itself is made of metal material, so after emptying and basic rinsing, place it in the appropriate fraction for metal packaging according to the sorting rules in your municipality. The plastic sprayer consists of several types of plastics which are not always recycled in the same way, so it is advisable to separate it from the bottle and follow local recommendations for sorting plastic waste. Always follow the recycling symbols and the information in the product parameter table.

When choosing a suitable bottle, vial or jar, we recommend using the extended filter in the categories on Handymade.sk. After clicking on the selected packaging category, you will find the extended filter at the top of the page, where you can sort products according to various parameters such as neck type and size, overall packaging size, colour and material used. By combining these filters, you will quickly select the packaging that best matches your formulation, the desired dosing method and the visual style of your brand.

When storing a product in an aluminium bottle, we recommend keeping the packaging in a dry environment protected from direct sunlight and extreme temperatures. It is important to verify the compatibility of the formulation used with the packaging material, especially for acidic or alkaline solutions and preparations with a high content of alcohol or essential oils. Before placing the final product on the market or starting regular use, it is advisable to carry out a long-term storage test, during which you monitor any changes in colour, scent, consistency or functionality of the sprayer.