Before first use we recommend thoroughly rinsing the packaging with a suitable cleaning component and then disinfecting it according to the type of formulation being filled. In practice, the use of technical or cosmetic alcohol (for example isopropyl alcohol or ethanol) has proven effective; after rinsing it should be allowed to evaporate completely. Then fill the packaging only after the inner surface has completely dried so that the stability of your product is not impaired.

Yes, the packaging can be reused provided it remains in good technical condition, but always with strict hygiene rules observed. Before each new filling it is necessary to clean and disinfect the bottle and sprayer thoroughly in order to minimise the risk of microbial contamination and product spoilage. For disinfection you can use, for example, isopropyl alcohol or ethanol of appropriate purity, available as IPA or denatured plant ethanol, and they must be allowed to evaporate completely after rinsing before the next filling.

The bottle is most suitable for low-viscosity liquids that need to be applied as a fine spray – hydrolats, toners, body and hair sprays, air fresheners or light cleaning solutions. For concentrated or highly oily blends it is always necessary to perform a trial filling first in order to verify the spray head’s throughput and the uniformity of atomisation. For very thick emulsions or oils a different type of dosing (for example a pump) may be more suitable.

We recommend storing the filled packaging in a dry place, at a stable room temperature and away from direct sunlight. This supports the stability of the contents as well as the service life of the packaging itself. Always keep the bottle tightly closed to prevent unwanted product leakage and a decrease in the proportion of volatile components such as essential oils or alcohol. In the case of frequent transport it is advisable, as a precaution, to test the packaging for tightness and, if the sprayer is damaged, to replace it in time.

If you decide not to reuse the packaging, we recommend recycling it according to the type of materials used, which are listed in the product parameters. The metal body of the bottle is generally classified as metal packaging, and the plastic parts of the sprayer go into sorted plastic waste according to local rules. Before disposal it is advisable to empty the packaging as much as possible and remove any product residues. By sorting correctly you contribute to more efficient use of raw materials and to reducing the environmental burden.

The simplest way to choose a suitable bottle, jar or vial is to use the advanced filter in the packaging material categories. It is located in the upper part of the page after clicking on a specific category and allows you to filter packaging according to several parameters – for example by type of neck, desired size, colour or material. Thanks to this you can quickly narrow down the selection only to packaging that matches your formulation, brand design and intended dosing method.