Yes, the container can be reused, provided you follow basic hygiene rules and take into account the material’s compatibility with your formulation. Before each new filling, the bottle and sprayer must be thoroughly cleaned and disinfected, ideally using isopropyl alcohol or ethanol intended for this purpose. For disinfection, you can use the products IPA 99 % – izopropyl alkohol or Etanol 96 % denaturovaný rastlinný. After thorough rinsing and complete drying, the container is ready for further use.

First, if the design allows, the sprayer should be disassembled into the accessible parts and rinsed with lukewarm water and a mild detergent. Then we recommend flushing the dip tube and the internal mechanism with clean water to remove residues of the original product. Disinfection is achieved by briefly flushing with a solution of isopropyl alcohol or ethanol – pour a small amount into the bottle, attach the sprayer and press the trigger several times so that the disinfectant solution passes through the entire system. Then allow all parts to dry thoroughly at room temperature.

If you decide not to reuse the container, we recommend recycling it in accordance with the material information given in the product parameters. Depending on the type of plastic from which the bottle and sprayer are made, assign it to the appropriate sorted waste stream (most often plastic waste). Before handing it over for recycling, empty the bottle, rinse out any remaining contents if necessary, and separate the individual material components where possible (for example, the plastic container and the sprayer mechanism). This will support more efficient sorting and processing of secondary raw materials.

The trigger sprayer is ideal for liquid preparations with low to medium viscosity that are to be applied as a fine to medium spray. In practice, these are mainly body and hair sprays, toners, air and fabric refreshers, cleaning solutions or working solutions intended for application to larger surfaces. Before final filling, we recommend testing the spraying with a small amount of product to verify whether the droplet size and type of distribution correspond to the intended use.

To select a suitable bottle, medicine bottle or other container, you can use the advanced filter in the packaging material categories. This filter is located at the top of the page after clicking on the relevant category and allows you to quickly narrow down the offer according to the parameters that are key for your product. You can filter containers by type of neck, required size, colour and material, which makes it easy to find a bottle, jar or pot that best suits your formulation and visual requirements.