News on our website
Nakúp ešte za 23,50€a dopravu máš zadarmo
Would you like to create account?
The plastic bottle with trigger sprayer represents a practical and durable packaging solution for a wide range of liquid preparations where fine and even atomiz... read more
1,25 € incl. VAT
The plastic bottle with trigger sprayer represents a practical and durable packaging solution for a wide range of liquid preparations where fine and even atomization is required. Thanks to the high-quality material and reliable spray mechanism, it is suitable for filling cosmetic, cleaning and craft formulations in which comfortable application and good protection of the contents against contamination are important.
The packaging is designed to provide convenient dosing in the form of a fine mist or a stream (depending on the type of fill and the sprayer setting) while at the same time reducing the risk of accidental leakage during transport or storage. The smooth surface of the bottle allows easy labelling with a sticker or print, which facilitates the professional presentation of the finished product.
If the packaging is made of PET material, it must be borne in mind that it is not suitable for exposure to high temperatures, at which there is a risk of surface deformation. Such packaging is not intended for cleaning in a dishwasher or for boiling; gentle hand‑cleaning at lower temperatures is recommended, depending on the nature of the fill.
This bottle with trigger sprayer represents a functional combination of packaging and dosing mechanism, which is created and supplied as one unit on Handymade. Combinations of packaging and closures that are created directly on Handymade are tested and functional. However, for all combinations and specific formulations we always recommend performing your own compatibility test – checking sealing, dosing performance, long‑term stability and the behaviour of the packaging in contact with the active ingredients used, the preservation system and solvents.
All technical parameters of the packaging are specified in the attached Packaging Quality Certificate and in the product parameters.
The trigger sprayer is primarily designed for thin liquids and aqueous solutions with low to medium viscosity, where a fine and even spray pattern is achieved. With thicker emulsions or gels, spraying performance may deteriorate and the nozzle may clog. We always recommend carrying out a trial on a small sample and verifying that the particular formulation passes through the dosing system smoothly and without residue.
The packaging can be reused if hygiene principles are observed, ideally for the same or a similar type of product. Before each refilling, the bottle and sprayer must be thoroughly cleaned and then disinfected, for example using isopropyl alcohol or ethanol. For disinfection you can use the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant‑based. After disinfection, all parts must be allowed to dry completely. When reusing, monitor the mechanical wear of the sprayer and replace it if its performance deteriorates.
If you decide not to reuse the packaging, we recommend placing it in the appropriate recycling stream according to the material specified in the product parameters on the website. Before disposal, it is advisable to empty the bottle, minimize any product residues and separate the spray mechanism if it is made from a different combination of materials. The body of the packaging itself should then be placed in the appropriate container for the collection of the relevant plastic in accordance with local waste‑sorting rules. In this way you support material recycling and more sustainable resource management.
For plastic packaging, especially if made of PET, it is not recommended to expose it to high temperatures, since this may lead to surface deformation or affect the tightness of the closure. The packaging is not suitable for cleaning in a dishwasher or for boiling. Gentle hand‑cleaning with lukewarm water and a suitable detergent, thorough rinsing and subsequent disinfection with an alcohol solution are recommended. The dosing mechanism should be regularly flushed with clean water and allowed to dry at room temperature.
To choose the right packaging, we recommend using the advanced filter, which you will find at the top of the page after clicking on the relevant packaging category. With this filter you can sort packaging by neck type, size, colour and material, which significantly simplifies navigation and allows you to quickly find a bottle, jar or vial that matches your formulation. For specific requirements, it is advisable to combine several filters at once and then also study the technical parameters and the quality certificate for the particular product.
Filled bottles should be stored at a stable room temperature, away from direct sunlight and heat sources. Avoid exposure to high temperatures so as not to cause plastic deformation or deterioration of closure tightness. For products containing alcohol and volatile substances, ensure that the sprayer is well closed and that storage is in a well‑ventilated area. It is also advisable to store the packaging in an upright position to minimize long‑term load on the sealing surfaces and to prevent possible leakage during transport.
