News on our website
Nakúp ešte za 23,50€a dopravu máš zadarmo
Would you like to create account?
The plastic bottle with white-gold spray pump is a practical and aesthetic packaging solution for liquid products where gentle and even dosing by means of a spr... read more
0,86 € incl. VAT
The plastic bottle with white-gold spray pump is a practical and aesthetic packaging solution for liquid products where gentle and even dosing by means of a spray is important. The transparent design makes it possible to keep constant track of the fill level and the character of the contents, which facilitates batch control as well as orientation while working.
Thanks to the combination of a clear container and a functional spray pump, this packaging is suitable for filling various liquid formulations – from cosmetic preparations to homemade solutions for versatile use. The rigid plastic body together with the high-quality spray mechanism helps keep the contents protected during normal handling and at the same time ensures convenient application without contact with the skin of the hands.
Notice regarding PET material: for a plastic package made of PET it is not suitable to expose the bottle to high temperatures, because there is a risk of deformation. The package is not intended for boiling or for cleaning in a dishwasher. Gentle manual cleaning at lower temperatures with appropriately selected cleaning agents is recommended.
This spray bottle is supplied as a functional combination of the container and the dosing component, ready for direct use with a suitable formulation. The packaging and closure combinations created directly on Handymade are tested and functional. However, for all combinations we always recommend carrying out your own compatibility test (sealing, dosing and behaviour of the packaging in contact with the specific formulation), so that you can be sure that the packaging is suitable for the specific recipe and method of use.
All technical parameters of the packaging are given in the attached Packaging Quality Certificate and in the product parameters.
Details such as material type, dimensions, neck finish or other specifications can be found directly in the technical documentation and in the parameter table for the product. When planning filling and selecting suitable formulations, we recommend that you carefully take this data into account.
Yes, the packaging can be reused if handled correctly and if hygiene principles are followed. Before each new filling, the bottle and the spray pump must be thoroughly cleaned and then disinfected with a suitable agent, for example isopropyl alcohol IPA 99 % or 96 % ethanol denatured. For this purpose, you can use products available on Handymade, for example IPA 99 – isopropyl alcohol or Ethanol 96 % denatured plant-based. After disinfection, allow all parts to dry completely and only then fill them again.
For bottles made of PET material it is important to avoid high temperatures, which can lead to deformation or weakening of the package. Do not boil the bottle, do not put it in a dishwasher and do not expose it to long-term direct sunlight or radiant heat. Gentle hand washing in lukewarm water with a mild cleaning agent is recommended, followed by thorough rinsing and, if necessary, disinfection with a suitable alcohol-based product before the next use.
The spray pump is ideal for liquid products with low to medium viscosity that are intended to be applied in a thin layer or as a fine mist. In practice this concerns mainly facial and body toners, floral waters, hair sprays, light conditioners, aromatherapy blends and interior or textile fresheners. For thicker emulsions or oils, spraying may be limited, therefore it is always suitable to carry out a test filling and to check the dosing functionality.
If you decide not to use the packaging any further, it is recommended to recycle it according to the material specified in the product parameters. First, empty any remaining contents, rinse the bottle if possible and separate the plastic container from the spray pump. The PET container itself is usually placed in a bin intended for plastic waste, while local waste sorting rules may define the exact procedure. The spray pump, which contains a combination of several materials, usually has to be disposed of as mixed plastic waste according to the instructions of your collection system. For specific formulations (for example chemical cleaners), also follow the recommendations of the filler manufacturer.
To select a suitable bottle, pill bottle, jar or other type of packaging, you can use the extended filter in the relevant category. After clicking on the packaging category, the extended filter is located at the top of the page and allows you to clearly filter products according to several parameters. You can choose by neck type, size, colour and packaging material, which significantly simplifies the search for the right combination of container and closure for a specific product. The filtering will also help you to quickly orient yourself in cases where you are preparing several types of products with different packaging requirements.
