Yes, the packaging can be reused with a suitable type of content, provided that basic hygiene rules are followed. Before each refilling, the bottle and the sprayer must be thoroughly cleaned and then disinfected, for example using isopropyl alcohol IPA 99 % or denatured plant ethanol Ethanol 96 %. At the same time, it is advisable to check the condition of the spray mechanism and, if there are signs of wear, consider replacing it. With PET plastic packaging avoid exposure to high temperatures in order to prevent deformation.

First rinse the bottle with moderately warm water to remove residues of the original product. Then you can clean it with a mild detergent suitable for plastic materials and rinse it thoroughly again. After drying, we recommend disinfecting the packaging – rinsing the inner space and the spray mechanism with alcohol, for example products such as IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant, has proved effective. Do not expose the packaging to boiling or to washing in a dishwasher in order to avoid damage or deformation of the plastic.

The bottle with trigger sprayer is a universal packaging, but the suitability for a specific formulation must always be verified by testing. Alcohol-based or partially oil-based preparations may have different requirements for the material and for the spray mechanism. Before final filling we recommend preparing a smaller trial batch, storing it in the packaging for a longer period and monitoring the sealing, spray functionality and any changes in the appearance of the plastic or in the odour of the content. If no negative changes occur, the packaging is suitable for the given type of product.

If you decide not to reuse the packaging, it is appropriate to place it in sorted waste collection according to the type of material stated in the product parameters. In most cases, the plastic body of the bottle is sorted into the container intended for plastic waste. Before disposal, empty the packaging completely, remove residues of the product and, where possible, separate the bottle from the sprayer, as the latter may contain a combination of several materials. Follow local waste sorting rules and the recommendations given for the specific packaging on Handymade.sk to support effective material recycling.

The simplest way to choose is to use the advanced filter in the packaging categories. After clicking on the relevant category (for example bottles, jars, dropper bottles or sprayers), you will find an option for detailed filtering at the top of the page. Using the filter, you can adapt the selection according to the neck type, size, colour and material of the packaging, and thus quickly find a suitable combination of container and closure for a specific product. For each packaging, parameters and recommendations are given to help you decide whether it is suitable for the intended use.