Spend over €100 for discounted shipping!

+421 950 333 113[email protected]

CO2 Extracts

Frankincense CO2-se Extract, Organic, 10 ml

Pack size5 ml10 ml100 ml

Frankincense CO2-se extract is a fragrance component obtained from the resin of the Boswellia carterii tree by extraction with carbon dioxide. full description

AvailabilityIn stock · 10 packs
Product codeCO205_10
Batch102510
Best before02/2027
€10.99incl. VAT−12 %Original price €12.51€1,099.00/l

Lowest price in the last 30 days: €10.99

Product description

Frankincense CO2-se extract is a fragrance component obtained from the resin of the Boswellia carterii tree by extraction with carbon dioxide. It is used in facial and body cosmetics, soaps and aromatherapy blends, where it brings the scent of frankincense in oil form. The raw material is COSMOS Organic certified, the resin comes from Somalia and is processed in Europe.

No organic solvents are used in production; the only extraction medium is carbon dioxide. The resulting extract is a mixture of volatile fragrance components that also occur naturally in frankincense essential oil, and in a formulation it behaves as an oil-based fragrance component.


What it is good for

  • Facial cosmetics – creams, oil-based serums and facial oils for normal, dry and mature skin.
  • Body care – body oils, massage blends, balms and butters, where it works as a standalone fragrance or as part of a composition.
  • Soaps – we recommend checking how it behaves in your specific type of soap on a small batch.
  • Diffusers and aromatherapy – blends for diffusers and aroma lamps.
  • Antimicrobial effect – a supplementary property of the fragrance component, not a replacement for a preservative system.

Use in a formulation

The extract is oil-soluble and insoluble in water, so it is added to the oil phase or directly to anhydrous products. In emulsions it belongs in the finished cream after cooling, and in anhydrous balms and butters at the moment the mixture starts to set. In water-based products, for example a toner or spray, a solubiliser is necessary and the stability of the mixture must be checked.

Process it at a temperature below 40 °C. Volatile fragrance components are lost at higher temperatures, and the scent of the finished product is then weaker than the amount used would suggest.

The usage rate is governed by the IFRA standards for the specific product category. When putting together a formulation, check the current IFRA limit for the given product type and stay below it.

The raw material contains one or more fragrance allergens listed in Annex III of Regulation (EC) No 1223/2009, as amended by Commission Regulation (EU) 2023/1545. If the relevant limits are exceeded, the allergens must be stated in the ingredients of the finished product. The substance is also classified under CLP and is flammable. Handle the undiluted extract wearing gloves, away from sources of heat and in accordance with the safety data sheet (SDS).


Good to know

The extract is yellow and at higher usage rates it may slightly colour light anhydrous products. When combining it with essential oils, keep in mind that the total content of fragrance components in the product is cumulative.

The raw material contains no materials of animal origin, has not been tested on animals and is not subject to the CITES convention. It is free from palm oil ingredients and GMO-free. In addition to COSMOS Organic certification, it holds Halal and Kosher certificates, which helps when producing for customers who require these declarations.


Frequently asked questions

What is the difference between frankincense CO2-se extract and frankincense essential oil?
Frankincense CO2-se extract is obtained from the resin by extraction with carbon dioxide without organic solvents, whereas the essential oil is produced by distillation. The extract contains volatile fragrance components that also occur naturally in frankincense essential oil. In a formulation both are used in the same way, as an oil-based fragrance component with the usage rate set by IFRA and processing below 40 °C.
Is frankincense CO2-se extract soluble in water?
No, frankincense CO2-se extract is insoluble in water and dissolves only in oils and fats. In creams and lotions it is added to the oil phase or to the cooled emulsion. For toners, hydrosol sprays and other water-based products a solubiliser is needed, and we recommend checking the stability of the mixture beforehand.
How much frankincense CO2-se extract should be added to a cream or oil?
The usage rate of frankincense CO2-se extract is governed by the IFRA standards for the specific product category; no fixed percentage is given. The limit differs depending on whether it is a leave-on facial product, a body oil or a rinse-off product. Before preparing the formulation, check the current IFRA limit for the given product type and keep your usage rate below it.
At what temperature is frankincense CO2-se extract added to a product?
Frankincense CO2-se extract is processed at a temperature below 40 °C. In emulsions it is added after the finished cream has cooled, and in balms and butters at the moment the mixture starts to set. At higher temperatures the volatile fragrance components are lost and the finished product smells weaker than the amount used would suggest.
Does frankincense CO2-se extract contain fragrance allergens?
Yes, frankincense CO2-se extract contains one or more fragrance allergens listed in Annex III of Regulation (EC) No 1223/2009, as amended by Commission Regulation (EU) 2023/1545. If the relevant limits are exceeded, the allergens are stated in the ingredients of the finished cosmetic product. You will find the specific allergens and their content in the safety data sheet for the product.
Can frankincense CO2-se extract be used in a diffuser?
Yes, frankincense CO2-se extract is also intended for diffusers and aromatherapy blends. It is used on its own or in combination with essential oils. For ultrasonic diffusers, follow the device manufacturer’s recommendations; the extract is oily and does not dissolve in water.

Parameters

INCI
Boswellia Carterii Resin Extract
CAS No.
89957-98-2
EC number
289-620-2
Product color
Yellow
Country of origin
SomaliaGermany
Processing method
CO2 Extraction
Appearance
Oil solution
Formulation phase
Oil phase
Function in formulation
Fragrance component
Application area
FaceBody
Recommended processing temperature
< 40 °C
Recommended dosage range
podľa IFRA %
Application type
Leave-onRinse-off
Certifications
Organic certification
Manufacturer's certificate
HalalKosherCOSMOS Organic
Natural Index (NI ISO 16128)
1,00
Natural Origin Index (NOI ISO 16128)
1,00
Organic content
100 %
Renewable Carbon Content (RCC)
100 %
Volume
10 ml

Product documentation

CoACertificate of Analysis
batch 102510PDF ↓
TDSTechnical Data Sheet
Physical parameters and processingPDF ↓
AllergensAllergen Declaration
batch 102510PDF ↓
MSDSSafety Data Sheet
Available for purchased products —
Download all (ZIP)

3 PDF files in one archive

Learn how to work with it

From our blog
REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.