GLASS BOTTLES 30 ml
Blue Glass Bottle, Matte Silver Dropper, 30 ml
Pack size10 ml15 ml30 ml50 ml100 ml
This blue glass 30 ml bottle with a dropper is intended for cosmetic products that are dispensed drop by drop and need protection from light . full description
Lowest price in the last 30 days: €1.07
Save €0.03 with this set
Total for 1 pcs: €1.07
Quantities add up across all combinations of this bottle.
Product description
This blue glass 30 ml bottle with a dropper is intended for cosmetic products that are dispensed drop by drop and need protection from light. Blue glass reduces the amount of light reaching the contents, helping to keep face serums, oil blends with essential oils and cosmetic tinctures stable, as they lose potency or change scent more quickly in light. The bottle and the closure are supplied together, so choosing a suitable dropper and getting a tight seal are already taken care of.
Glass does not react with common cosmetic ingredients or with alcohol, so it is also suitable for contents that would gradually damage plastic packaging. The dropper with a matte silver finish gives the product a uniform look that works well for selling or gifting.
What it is suitable for
- Face and hair serums – both water-based and oil-based, where one dose is counted in a few drops.
- Oil blends and massage oils in small packs – 30 ml is enough for samples, trial batches or more expensive oils that are used up slowly.
- Blends with essential oils – cuticle oils or beard oils, where blue glass helps slow down changes in scent.
- Cosmetic tinctures and alcohol extracts – glass does not react with alcohol, and the dropper allows precise dispensing.
- Concentrated active ingredients – vitamin or plant concentrates that are added drop by drop to finished cosmetics.
Thicker products, such as creams or gels, are difficult to dispense with a dropper. Jars or bottles with a pump are more suitable for them.
Dropper and dispensing
The dropper consists of a glass tube, a white silicone bulb for squeezing, and an aluminium ring with a matte silver finish that screws onto the neck of the bottle. The length of the tube is matched to this bottle so that it reaches deep enough to draw up the remaining contents as well. When properly tightened, the joint seals.
To dispense, squeeze the bulb with the tube immersed. When you release it, the contents are drawn up, and after you lift the dropper out, drops are released by gently squeezing. The size of the drop depends on the viscosity of the product: thin water-based serums drip faster and in smaller drops than thick oils. If you state a recommended dose on the label, measure the number of drops per 1 ml for your particular formulation.
Tighten the dropper with moderate force only. Overtightening can damage the thread or the seal, and the joint will then seal less well than when properly tightened.
Nominal and total volume
The bottle is designed to be filled with 30 ml of product, which is its nominal volume. The total volume to the brim is larger and can be found in the parameters. The difference provides headroom for the dropper, which pushes part of the contents upwards when it is screwed in, and for the expansion of the contents with changes in temperature. For this reason, fill the bottle to the nominal volume, not to the rim of the neck. If it is overfilled, the contents are pushed out through the neck when the dropper is fitted and soil the thread, which then becomes sticky and seals less well.
What to know before filling
Before first use, wash the bottle and the dropper, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Moisture inside would introduce water into an anhydrous product, and without a preservative water promotes the growth of microorganisms. Rinse the inside of the dropper with alcohol as well by squeezing the bulb several times.
Glass withstands normal temperatures during filling, but a sudden change in temperature is not good for it. Let a hot mixture cool slightly before pouring, and do not place the bottle on a cold surface straight after filling.
The silicone bulb is resistant to most cosmetic ingredients. With a high proportion of essential oils or solvents, check compatibility: leave a drop of the product on the bulb and after a few days check whether the material softens or changes colour.
The packaging is declared as suitable for contact with cosmetic products, and the declaration of conformity is available with the product. After thorough washing and disinfection, the bottle can be reused. The dropper is replaced when the bulb loses its elasticity or the joint stops sealing. Once sorted, glass goes into glass recycling; before recycling, the dropper is taken apart into the metal ring, the plastic parts and the glass tube.
Water-based and water-diluted products without a preservative do not stay stable for long in a bottle with a dropper. With each use, the dropper comes into contact with air and skin and introduces microorganisms into the contents. Always preserve water-based serums, and do not leave the dropper outside the bottle after use.
Frequently asked questions
Parameters
Glass bottle, vial, blue, 18 mm, 30 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



















































