+421 950 333 113info@handymade.store−10 %Shop now

GLASS BOTTLES 100 ml

Clear Glass Bottle, Black Safety Cap & Dropper 100 ml

Pack size5 ml10 ml12 ml15 ml30 ml50 ml100 ml

This clear glass medicine bottle with a capacity of 100 ml , a plastic dropper insert and a black ribbed safety cap is used for filling and dispensing cosmetics drop by drop . full description

AvailabilityIn stock · 928 pcs
Product codeO18SP100-OVV18PC2
€0.95incl. VAT

Lowest price in the last 30 days: €0.95

Volume pricing
1–79 pcs€0.95Your price
80–1039 pcs€0.90−5 % · 1× plato
1040–5039 pcs€0.86−9 % · 13× plato
from 5040 pcs€0.80−15 % · 63× plato

Total for 1 pcs: €0.95

Quantities add up across all combinations of this bottle.

Add 79 more pcs and the price drops to €0.90/pc.

Product description

This clear glass medicine bottle with a capacity of 100 ml, a plastic dropper insert and a black ribbed safety cap is used for filling and dispensing cosmetics drop by drop. The clear glass shows the colour and clarity of the contents, so it suits facial oils, oil serums, blends of essential oils in a carrier oil and tinctures, where the customer should see what they are buying. The set as a whole is intended for contact with cosmetics. The glass bottle on its own also has a certificate for direct contact with food, while the dropper insert and the cap do not.

The ribbed surface of the cap gives a good grip. The dropper insert sits in the neck of the bottle under the cap and releases the contents one drop at a time, so nothing spills during application.


How the set works

The bottle has an 18/410 neck finish. After filling, the dropper insert is pressed into the neck and the cap is screwed onto the thread. In use, the bottle is tilted or turned upside down and the contents flow out drop by drop through the narrow opening of the dropper insert. The dispensing speed depends on the viscosity of the contents. Thin oils and alcohol-based solutions flow easily, thicker oils more slowly. Thick serums with a gel texture and creams will not pass through the dropper insert and need a different type of closure.


What it is suitable for

  • Facial and body oils – drop-by-drop dispensing lets you apply a precise small amount, usually a few drops for the face.
  • Oil serums with active ingredients – for formulations where the daily dose is given in drops.
  • Blends of essential oils in a carrier oil – ready-made massage or aromatic blends at a low concentration. With a higher proportion of essential oils, we recommend checking in advance how the dropper insert behaves with the specific contents.
  • Tinctures and alcohol-based extracts – thin alcohol-based solutions flow smoothly through the dropper insert and glass does not react with alcohol.
  • Samples and small batches – the 100 ml volume suits test batches as well as the sale of smaller packs.

The set is not suitable for water-based toners intended for spraying or for emulsions. The dropper insert cannot handle thick textures, and water-based products are usually dispensed with a sprayer.


Nominal and total volume

The nominal volume of 100 ml is the amount the bottle is designed for in normal filling. The brimful capacity given in the parameters is the physical volume up to the top of the neck. The difference between them is a reserve for the dropper insert, which takes up part of the space once pressed into the neck, and for the expansion of the contents when the temperature changes. For this reason, fill up to the nominal volume, not to the brim. If the bottle is overfilled, the contents are pushed out when the dropper insert is fitted and the cap then does not seat properly.

Fill the bottle standing on a level surface and fit the dropper insert only after the contents have settled below the neck. The contents should be cooled to room temperature when filling, as a sharp difference in temperature is not good for glass.


Good to know

Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. Residual water in an oil or an anhydrous serum is undesirable. For the dropper insert and the cap, it is enough to disinfect and dry them.

Clear glass does not block light. Store contents that are sensitive to light, such as oils with a higher proportion of unsaturated fatty acids or serums with retinol, in the dark or in a box.

The bottle can be reused if you wash and disinfect it thoroughly after emptying. The dropper insert has a narrow channel that is harder to clean, so when you change the contents, it is better to replace it with a new one.

You will find closures with the same 18/410 neck finish and other ready-made combinations in the Handymade range. If you are making your own combination, we recommend checking the tightness and dispensing with your specific formulation, especially with alcohol-based solutions and blends containing essential oils.

After use, sort the bottle as glass, and the dropper insert and the cap as plastic.

Keep packaging with cosmetics out of the reach of children.


Frequently asked questions

Does a clear glass bottle protect the contents from light?
No, clear glass does not block light, and the contents are exposed to it just as in an open container. It suits ingredients that are not affected by light, or products stored in the dark or in a box. If you store oils and serums that are sensitive to oxidation and light in it, keep it away from direct light and use them up sooner.
How much liquid fits in a 100 ml glass medicine bottle with a dropper insert?
You fill it up to the nominal volume of 100 ml, not to the brim. The physical volume of the bottle up to the neck is slightly larger, and the difference forms a reserve for the dropper insert, which takes up part of the space once fitted, and for the expansion of the contents when the temperature changes. If the bottle is overfilled, the contents are pushed out of the neck when the dropper insert is pressed in and the cap does not seat.
Is a glass bottle with a dropper insert and a cap suitable for food?
The set as a whole is not approved for contact with food. The glass bottle on its own has a certificate for direct contact with food, while the plastic dropper insert and the cap do not. The whole assembly is declared suitable for contact with cosmetics, that is, for oils, serums, tinctures and similar cosmetic preparations.
Can a glass medicine bottle with a dropper insert be reused?
Yes, the glass bottle can be refilled after thorough washing and disinfection with ethanol or isopropyl alcohol. The dropper insert has a narrow channel in which residues of the previous contents may remain, so we recommend replacing it with a new one when you change the contents. For the cap, it is enough to disinfect and dry it.
Is the plastic dropper insert suitable for blends with essential oils?
Yes, for blends of essential oils diluted in a carrier oil – at a low concentration, the dropper insert is commonly used for this. With a higher proportion of essential oils or with alcohol-based solutions, we recommend fitting the dropper insert into the filled bottle and checking after a few days that it has not changed shape or colour, or lost its tightness in the neck.

Parameters

Glass bottle, vial, clear 100 ml

Product colour
Clear
Country of origin
European Union
Nominal capacity
100
Brimful capacity
108 ml
Diameter
45 mm
Thread type
18/410
Height
116,2 mm
Dimensions
Ø 45 × 116,2 mm
Product material
Glass

Plastic dropper for glass vials, 18 mm, long

Product colour
Clear
Country of origin
China
Diameter
14,5 mm
Height
29 mm
Product material
PlasticLDPE

Black Tamper Evident Safety Cap, Ribbed 18/410

Product colour
Black
Country of origin
China
Diameter
24,5 mm
Thread type
18/410
Height
25 mm
Product material
HDPEPlastic

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, vial, clear 100 ml · O18SP100PDF ↓
Plastic dropper for glass vials, 18 mm, long · OVV18KDPDF ↓
Black Tamper Evident Safety Cap, Ribbed 18/410 · OVV18PC2PDF ↓
PDSProduct Data Sheet
Glass bottle, vial, clear 100 ml · O18SP100PDF ↓
Plastic dropper for glass vials, 18 mm, long · OVV18KDPDF ↓
Black Tamper Evident Safety Cap, Ribbed 18/410 · OVV18PC2PDF ↓
DrawingTechnical drawing
Glass bottle, vial, clear 100 ml · O18SP100PDF ↓
Plastic dropper for glass vials, 18 mm, long · OVV18KDPDF ↓
Black Tamper Evident Safety Cap, Ribbed 18/410 · OVV18PC2PDF ↓
Download all (ZIP)

9 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.