GLASS BOTTLES 100 ml

Clear Glass Bottle, Glossy Silver White Pump, 100 ml

Name: Clear Glass Bottle, Glossy Silver White Pump, 100 ml
Brand: Handymade
SKU: O18SP100-OVD18PSBL
Price: 1.39 EUR
Availability: InStock

Pack size10 ml 12 ml 15 ml 30 ml 50 ml100 ml

Glass bottle with pump dispenser 100 ml is a ready-made set for products that are dispensed in small amounts and should not come into unnecessary contact with fingers or air. full description

AvailabilityIn stock · 656 pcs

Product codeO18SP100-OVD18PSBL

€1.39incl. VAT

Lowest price in the last 30 days: €1.39

Volume pricing

1–199 pcs€1.39Your price

200–999 pcs€1.27−8 %

1000–4999 pcs€1.22−12 %

from 5000 pcs€1.10−21 %

Total for 1 pcs: €1.39

Quantities add up across all combinations of this bottle.

What's in the set

Glass bottle, vial, clear 100 ml

Plastic dispenser, 18/415, white-silver, glossy

Product description

Glass bottle with pump dispenser 100 ml is a ready-made set for products that are dispensed in small amounts and should not come into unnecessary contact with fingers or air. It consists of a glass vial-shaped bottle with a nominal volume of 100 ml and a plastic pump dispenser with a white head and a glossy silver collar. It is particularly suitable for facial serums, light emulsions, facial and body oils, liquid essences, hydrating fluids and liquid foundations.

The clear glass shows the colour and consistency of the contents, making it suitable for products where you want to show the customer the purity, colour or layering of the ingredients. The set is declared suitable for contact with cosmetics. The glass bottle alone has a certificate for direct contact with food; the set as a whole is intended for cosmetics.

Why choose a bottle with a pump dispenser

Hygienic dispensing – the contents are not scooped out with fingers or poured, and minimal outside air enters the bottle. This is an advantage for serums with sensitive active ingredients and for products used over a longer period.
Small dose per press – the dispenser releases approximately 0.14 ml per press, which corresponds to a typical application of serum or oil to the face. For larger areas, simply press multiple times.
Dip tube reaches the bottom – the length of the intake tube is matched to the height of the bottle, so almost the entire contents can be used without tilting.
Glass and a lightweight dispenser – the bottle has a firm, cool feel and stands stably on a shelf; the dispenser is lightweight and operated with one hand.
Neutral appearance – the combination of clear glass, a white head and a glossy silver collar gives a neutral look that can be completed with a label in any colour.

Nominal and total volume

Nominal volume is the amount the bottle is designed to hold under normal filling. Total volume to the brim is the physical volume up to the neck and is slightly higher. The difference provides a reserve for the dip tube and the body of the dispenser, which occupy part of the internal space once screwed in, and for the expansion of the contents with temperature changes. Filling is therefore done to the nominal volume, not to the brim. Overfilling causes the contents to be pushed out through the neck when the dispenser is attached, contaminating the thread and impairing the seal.

Before batch filling, we recommend filling one bottle as a trial, attaching the dispenser and pressing it several times. This lets you verify that your formulation draws up properly and that the dispenser dispenses smoothly.

What is good to know when filling and using

The consistency of the contents is critical with a pump dispenser. The dispenser is designed for liquid and mildly viscous products such as serums, oils, fluids and light emulsions. Thick creams, butters or high-viscosity gels are difficult or impossible to draw up. It is advisable to test the behaviour with your specific formulation before producing a larger batch.

First use requires several empty presses before the dip tube and the body of the dispenser fill with product. When handing the product to the customer, it is good practice to include this information on the label or in the instructions.

Preparation before first fill: wash the bottle with warm water, disinfect if needed with isopropyl alcohol or ethanol and leave to dry completely. Rinse the dispenser with warm water by pumping it through several times, then leave to dry. Glass does not tolerate sudden temperature changes, so do not place a hot bottle in cold water.

Reuse: the bottle can be reused after washing without restriction. The dispenser is harder to clean thoroughly because some product remains in the tube and mechanism. When changing the type of product, especially from an oil to a water-based formulation, it is safer to use a new dispenser.

Light: clear glass provides no protection against UV radiation. Formulations with oxidation-sensitive oils, vitamin C or retinoids should be stored out of direct light or a dark glass should be chosen instead.

Labelling: the straight cylindrical surface of the bottle allows applying a wrap-around or front label.

Recycling: the glass bottle goes in the glass recycling. The dispenser combines plastic and aluminium, so it should be separated from the bottle before disposal.

When shipping finished products, pressure inside the parcel may press the pump head and release a dose into the box. We recommend securing the pump head with tape or packing the product in an upright position.

Frequently asked questions

Is the glass bottle with pump dispenser 100 ml suitable for facial oils?

Yes, liquid vegetable oils and oil serums are drawn up by the dispenser without any issues. The dip tube reaches the bottom of the bottle, so almost the entire contents can be used. For thicker oils or blends with butters, it is advisable to check that the dispenser dispenses smoothly. For oxidation-sensitive oils, protect the clear glass from light.

Can a cream be filled into the glass bottle with pump dispenser?

No, a regular cream is not suitable for a bottle with a pump dispenser. The dispenser is designed for liquid and mildly viscous products such as serums, oils and fluids. Thick creams and gels cannot be drawn through the tube or will clog the dispenser. For creams, pots or jars are more suitable — you can find these in the Handymade range.

Does the clear glass bottle protect the contents from light?

No, clear glass lets light through and does not protect the contents from UV radiation. It is therefore suitable for formulations that are stable to light, or for products stored in a box or out of direct light. For oxidation-sensitive ingredients, amber or blue glass is more appropriate.

How much product is filled into the glass bottle with pump dispenser 100 ml?

Filling is done to the nominal volume, i.e. approximately 100 ml. The bottle has a slightly larger physical volume to the brim, but this serves as a reserve for the dip tube and the body of the dispenser and for the expansion of the contents with temperature changes. When filled to the brim, the contents are pushed out through the neck when the dispenser is attached, contaminating the thread.

Is the glass bottle with pump dispenser set also suitable for food?

No, the set as a whole is intended for cosmetics. The glass bottle alone has a certificate for direct contact with food; the dispenser does not have such a certificate. If you need a container for home oils or syrups, choose a bottle with a closure approved for contact with food.

How is the dispenser cleaned when reused?

The dispenser is cleaned by pumping warm water through it until clean water comes out, then allowing it to dry. Residues of product in the tube and mechanism cannot be fully removed, however, so when changing the type of product it is safer to use a new dispenser. The glass bottle can be washed and disinfected without restriction.