Before first use we recommend thoroughly cleaning the bottle, the dispenser and all contact parts, rinsing them and then disinfecting them with a suitable alcohol-based preparation. For disinfection you can use the products IPA 99 % isopropyl alcohol or ethanol 96 % denatured plant-based. After applying the disinfectant, let all parts dry completely at room temperature and only then fill the bottle with the final formulation.

The bottle can be reused if hygiene principles are observed. After emptying, we recommend disassembling the entire packaging including the dispenser as far as possible, cleaning it mechanically, rinsing thoroughly and then disinfecting with alcohol-based preparations, for example IPA 99 % isopropyl alcohol or ethanol 96 % denatured plant-based. Before refilling it is important that all parts are completely dry and clean, thereby minimising the risk of microbial contamination of the new formulation.

The integrated dispenser is designed primarily for creamy and emulsion-based products of medium to higher viscosity, such as facial creams, serums with thicker consistency, treatment hand creams or targeted products. For very thin formulations, dispensing may be too intensive, while for extremely thick balms it may be more difficult, so we always recommend carrying out a trial filling and testing dispensing comfort with the specific formula.

We recommend storing filled bottles in a dry place, at a stable room temperature and away from direct sunlight or heat sources. Even though opaque glass helps protect the contents from light, long-term exposure to high temperatures can affect the stability and consistency of the cosmetic product. For formulas with more sensitive active ingredients, follow the storage recommendations for the given raw material and, if necessary, choose a cooler environment.

If you decide not to use the bottle further, we recommend first emptying it and removing product residues according to local rules for the disposal of cosmetic products. The glass part of the packaging should then be taken to the appropriate separated collection point intended for glass. The plastic components of the dispenser need to be separated and placed into sorted waste according to the type of plastic stated in the product parameters or handed over at a collection site. By following local recycling rules you support responsible handling of packaging material.

To select suitable packaging you can use the extended filter located at the top of the page after opening the selected packaging material category. In the extended filter you can clearly choose parameters such as neck type and size, total packaging size, colour and material. This allows you to quickly find bottles, dropper bottles, jars or pots that meet the technical and aesthetic requirements of your specific product.