GLASS BOTTLES 15 ml
Gloss Black Glass Bottle, Matte Black Dropper, 15 ml
This glossy black glass bottle with a capacity of 15 ml and a matte black dropper is used for filling small quantities of facial oils, serums, essential oil blends, tinctures and other products that are dispensed drop… full description
Lowest price in the last 30 days: €0.97
Total for 1 pcs: €0.97
Quantities add up across all combinations of this bottle.
Product description
This glossy black glass bottle with a capacity of 15 ml and a matte black dropper is used for filling small quantities of facial oils, serums, essential oil blends, tinctures and other products that are dispensed drop by drop. The opaque black glass protects the contents from light, so vegetable oils, vitamin serums and fragrance blends sensitive to sunlight keep better than in clear packaging. The threaded dropper allows you to measure a dose precisely and without your fingers touching the contents, which you will appreciate with concentrated ingredients used in a few drops.
The set is declared suitable for contact with cosmetic products. The glass bottle on its own also has a certificate for direct food contact; the dropper does not, so the set as a whole is intended for cosmetics.
What the set is suited for
- Facial and hair serums – the small volume and drop-by-drop dispensing match the way serums are usually applied to the skin or scalp.
- Facial oils and oil blends – black glass slows the yellowing and oxidation of oils caused by light, and the dropper dispenses the oil without it running down the neck.
- Essential oil blends – both diluted and undiluted blends intended for dilution in carrier oils or for use in diffusers. The glass tube of the dropper is resistant to essential oils.
- Tinctures and alcohol extracts for cosmetic use – alcohol does not affect glass, and the dropper allows the extract to be dispensed drop by drop into toners or facial lotions.
- Samples and test batches – a volume of 15 ml is enough for trying out a formulation or for gift and travel packs.
Nominal and total volume
The nominal volume of 15 ml is the quantity the bottle is designed for in normal filling. The total brimful volume, given in the parameters, is the physical volume of the glass up to the neck. The difference between them is a reserve for the glass tube of the dropper, which pushes part of the contents upwards once screwed in, and for the expansion of the contents with changes in temperature. Fill the bottle only up to the nominal volume. If it is overfilled, the contents will overflow through the thread when the dropper is fitted and the closure will stop sealing.
Black glass does not allow you to check the level of the contents by eye. When filling, we recommend weighing on a scale or measuring the dose beforehand, for example with a syringe without a needle, and only then pouring it into the bottle.
The dropper and its parts
The dropper combines a glass tube, a silicone squeeze part and a polypropylene (PP) plastic collar that screws onto the thread of the bottle. The length of the tube is matched to the height of the bottle, so the contents can be drawn up even from an almost empty bottle. The matte black surface of the collar and the squeeze part matches the glossy glass.
The contents are drawn up by squeezing and releasing the silicone part, and the dose is measured by the number of drops. The size of a drop depends on the density of the contents, so for formulations with an exact quantity it is worth working out once how many drops of the given formulation correspond to one millilitre.
Good to know
- Preparation before first filling – wash the bottle and the dropper, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the tube or at the bottom of the bottle would introduce moisture into an anhydrous oil and could encourage the growth of microorganisms in a product without a preservative.
- Glass and heat – fill with contents that have cooled down. A sudden change in temperature, especially hot liquid poured into cold glass, can crack the glass.
- Silicone and plastic of the dropper – the dropper works without problems with common vegetable and essential oils, alcohol solutions and water-based serums. With undiluted essential oils or more aggressive solvents, we recommend verifying the long-term resistance of the silicone part and the collar directly with your formulation, as the behaviour of the material differs between individual substances.
- Tightness – tighten the dropper by hand, without force. If the thread is overtightened, the collar may crack or stretch and will then stop sealing.
- Reuse – the glass bottle can be used again after thorough washing and disinfection. The silicone squeeze part of the dropper wears out sooner than the glass after prolonged contact with oils, so check it before filling again.
- Other closures – the bottle has the neck type given in the parameters, and you will find closures with the same neck type as well as ready-made combinations in the Handymade range. If you make your own combination, we recommend verifying the tightness, dispensing and behaviour of the packaging with your specific formulation.
Store the bottle in a dry and clean environment both before and after filling, and protect it from impact.
Frequently asked questions
Parameters
Glass bottle, black glossy vial, 15 ml
Glass Dropper, Matte Black, 57 mm
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.




















































