The bottle with spray pump is ideal especially for low-viscosity and medium-viscosity liquids, such as toners, floral waters, water-based serums, light emulsions, alcoholic and hydroalcoholic solutions or aromatic mists. With thicker emulsions or oil blends, spraying performance may deteriorate or the mechanism may clog, therefore we recommend always first testing a small trial amount and verifying the smoothness of dosing.

The packaging can be reused if hygiene principles are observed, but it is recommended to choose one primary purpose (for example cosmetic toners) and not to alternate it between completely different types of products. Before each new filling, the bottle, spray pump and dip tube must be thoroughly cleaned and disinfected, for example using isopropyl alcohol IPA 99 % or plant-based ethanol Ethanol 96 % denatured. Allow the disinfectant solution to act, then rinse the packaging thoroughly according to the nature of the product being prepared and let it dry completely.

To extend the service life of the packaging, we recommend protecting the bottle from strong impacts and extreme temperature changes. For cleaning the glass, it is appropriate to use warm water and an adequate amount of mild detergent, while the spray pump is better only flushed with lukewarm water or a suitable cleaning solution to avoid damaging the seals. After cleaning, allow all parts to dry naturally at room temperature. Before refilling, always ensure disinfection of the packaging as well, according to the type of product being prepared.

If you decide not to use the packaging any further, we recommend recycling it according to the material composition indicated in the product parameters. The glass part can, after emptying and basic rinsing, be placed in a container intended for glass or handed in at a collection point according to local regulations. The plastic parts of the spray pump (head, mechanism, dip tube) belong in sorted plastic waste, if your collection system allows it. Before placing in sorted waste, remove any product residues and empty the packaging as much as possible to prevent contamination of other materials in sorted collection.

To select a suitable packaging, you can use the advanced filter located at the top of the page after clicking on the relevant packaging category. Using the filter, the offer can be clearly sorted according to several criteria, for example according to the type and neck diameter, packaging size, colour or material. Thanks to this, you can easily narrow down the selection to packaging solutions that best match your formulation, the intended dosing method and the design of the final product.